Merge branch 'master' of git://git.denx.de/u-boot-arm

[platform/kernel/u-boot.git] / include / configs / trab.h

diff --git a/include/configs/trab.h b/include/configs/trab.h
index 562cd60..9827195 100644 (file)
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002-2005
- * Gary Jennejohn <gj@denx.de>
+ * Gary Jennejohn <garyj@denx.de>
  *
  * Configuation settings for the TRAB board.
  *
@@ -40,11 +40,11 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_ARM920T         1       /* This is an arm920t CPU       */
-#define CONFIG_S3C2400         1       /* in a SAMSUNG S3C2400 SoC     */
-#define CONFIG_TRAB            1       /* on a TRAB Board              */
-#undef CONFIG_TRAB_50MHZ               /* run the CPU at 50 MHz        */
-#define LITTLEENDIAN           1       /* used by usb_ohci.c           */
+#define CONFIG_ARM920T 1       /* This is an arm920t CPU       */
+#define CONFIG_S3C24X0 1       /* in a SAMSUNG S3C24x0-type SoC        */
+#define CONFIG_S3C2400 1       /* specifically a SAMSUNG S3C2400 SoC   */
+#define CONFIG_TRAB    1       /* on a TRAB Board              */
+#undef CONFIG_TRAB_50MHZ       /* run the CPU at 50 MHz        */
 
 /* automatic software updates (see board/trab/auto_update.c) */
 #define CONFIG_AUTO_UPDATE     1
@@ -100,9 +100,10 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_CS8900   1       /* we have a CS8900 on-board */
-#define CS8900_BASE            0x07000300 /* agrees with WIN CE PA */
-#define CS8900_BUS16           1 /* the Linux driver does accesses as shorts */
+#define CONFIG_NET_MULTI
+#define CONFIG_CS8900          /* we have a CS8900 on-board */
+#define CONFIG_CS8900_BASE     0x07000300 /* agrees with WIN CE PA */
+#define CONFIG_CS8900_BUS16    /* the Linux driver does accesses as shorts */
 
 #define CONFIG_DRIVER_S3C24X0_I2C 1    /* we use the buildin I2C controller */
 
@@ -112,6 +113,7 @@
 /*
  * select serial console configuration
  */
+#define CONFIG_S3C24X0_SERIAL
 #define CONFIG_SERIAL1         1       /* we use SERIAL 1 on TRAB */
 
 #define CONFIG_HWFLOW                  /* include RTS/CTS flow control support */
@@ -317,21 +319,9 @@
 #define CONFIG_SYS_MEMTEST_START       0x0C000000      /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0x0D000000      /* 16 MB in DRAM        */
 
-#undef CONFIG_SYS_CLKS_IN_HZ           /* everything, incl board info, in Hz */
-
 #define        CONFIG_SYS_LOAD_ADDR            0x0CF00000      /* default load address */
 
-#ifdef CONFIG_TRAB_50MHZ
-/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-/* it to wrap 100 times (total 1562500) to get 1 sec. */
-/* this should _really_ be calculated !! */
-#define        CONFIG_SYS_HZ                   1562500
-#else
-/* the PWM TImer 4 uses a counter of 10390 for 10 ms, so we need */
-/* it to wrap 100 times (total 1039000) to get 1 sec. */
-/* this should _really_ be calculated !! */
-#define        CONFIG_SYS_HZ                   1039000
-#endif
+#define        CONFIG_SYS_HZ                   1000
 
 /* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
@@ -376,7 +366,9 @@
 #define        CONFIG_SYS_MONITOR_LEN          (256 << 10)
 
 /* Dynamic MTD partition support */
-#define CONFIG_JFFS2_CMDLINE
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT         "nor0=0"
 
 /* production flash layout */