+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2013 Stefan Roese <sr@denx.de>
*
*
* Based on mx6qsabrelite.h which is:
* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define CONFIG_MX6Q
-#define MACH_TYPE_TITANIUM 3769
-#define CONFIG_MACH_TYPE MACH_TYPE_TITANIUM
+/* Provide the MACH_TYPE value that the vendor kernel requires. */
+#define CONFIG_MACH_TYPE 3769
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024)
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
/* I2C Configs */
-#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000
/* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 1
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
#define CONFIG_FEC_MXC
-#define CONFIG_MII
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE RGMII
#define CONFIG_FEC_MXC_PHYADDR 4
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
-#define CONFIG_PHY_MICREL_KSZ9021
/* USB Configs */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
#define CONFIG_MXC_USB_PORT 1
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-/* Miscellaneous commands */
-#define CONFIG_CMD_BMODE
-
-#define CONFIG_SYS_MEMTEST_START 0x10000000
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (500 << 20))
-
-#define CONFIG_HOSTNAME titanium
+#define CONFIG_HOSTNAME "titanium"
#define CONFIG_UBI_PART ubi
#define CONFIG_UBIFS_VOLUME rootfs0
-#define MTDIDS_DEFAULT "nand0=gpmi-nand"
-#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:16M(uboot),512k(env1)," \
- "512k(env2),-(ubi)"
-
#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
+ "kernel=" CONFIG_HOSTNAME "/uImage\0" \
"kernel_fs=/boot/uImage\0" \
"kernel_addr=11000000\0" \
- "dtb=" __stringify(CONFIG_HOSTNAME) "/" \
- __stringify(CONFIG_HOSTNAME) ".dtb\0" \
- "dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0" \
+ "dtb=" CONFIG_HOSTNAME "/" \
+ CONFIG_HOSTNAME ".dtb\0" \
+ "dtb_fs=/boot/" CONFIG_HOSTNAME ".dtb\0" \
"dtb_addr=12800000\0" \
"script=boot.scr\0" \
"uimage=uImage\0" \
"rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
- "ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0" \
+ "ubifs=" CONFIG_HOSTNAME "/ubifs.img\0" \
"part=" __stringify(CONFIG_UBI_PART) "\0" \
"boot_vol=0\0" \
"vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \
"upd_ubifs=run load_ubifs update_ubifs\0" \
"init_ubi=nand erase.part ubi;ubi part ${part};" \
"ubi create ${vol} c800000\0" \
- "mtdids=" MTDIDS_DEFAULT "\0" \
- "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \
" addcon addmtd;" \
"bootm ${kernel_addr} - ${dtb_addr}\0" \
#define CONFIG_BOOTCOMMAND "run nand_ubifs"
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_PROMPT "Titanium > "
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-
/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define PHYS_SDRAM_SIZE (512 << 20)
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* Enable NAND support */
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_CMD_TIME
-
#ifdef CONFIG_CMD_NAND
/* NAND stuff */
-#define CONFIG_NAND_MXS
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
/* Environment in NAND */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET (16 << 20)
-#define CONFIG_ENV_SECT_SIZE (128 << 10)
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
#else /* CONFIG_CMD_NAND */
/* Environment in MMC */
-#define CONFIG_ENV_SIZE (8 << 10)
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV 0
#endif /* CONFIG_CMD_NAND */
/* UBI/UBIFS config options */
-#define CONFIG_LZO
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_RBTREE
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
#endif /* __CONFIG_H */