configs: move CONFIG_SPL_TEXT_BASE to Kconfig

[platform/kernel/u-boot.git] / include / configs / ti_omap4_common.h

diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index aa17c09..fc59aba 100644 (file)
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2010
  * Texas Instruments Incorporated.
@@ -5,21 +6,11 @@
  * Steve Sakoman  <steve@sakoman.com>
  *
  * TI OMAP4 common configuration settings
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_TI_OMAP4_COMMON_H
 #define __CONFIG_TI_OMAP4_COMMON_H
 
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP4430                1       /* which is in a 4430 */
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_SYS_THUMB_BUILD
-
 #ifndef CONFIG_SYS_L2CACHE_OFF
 #define CONFIG_SYS_L2_PL310            1
 #define CONFIG_SYS_PL310_BASE  0x48242000
@@ -59,7 +50,6 @@
 #define CONFIG_SYS_NS16550_REG_SIZE    (-4)
 #define CONFIG_SYS_NS16550_COM3                UART3_BASE
 #endif
-#define CONFIG_CONS_INDEX              3
 
 /* TWL6030 */
 #ifndef CONFIG_SPL_BUILD
@@ -67,8 +57,6 @@
 #endif
 
 /* USB */
-#define CONFIG_USB_MUSB_UDC                    1
-#define CONFIG_USB_OMAP3               1
 
 /* USB device configuration */
 #define CONFIG_USB_DEVICE              1
@@ -97,16 +85,13 @@
        func(PXE, pxe, na) \
        func(DHCP, dhcp, na)
 
-#define CONFIG_BOOTCOMMAND \
-       "run findfdt; " \
-       "run envboot; " \
-       "run distro_bootcmd"
-
 #include <config_distro_bootcmd.h>
+#include <environment/ti/mmc.h>
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        DEFAULT_LINUX_BOOT_ENV \
        DEFAULT_MMC_TI_ARGS \
+       DEFAULT_FIT_TI_ARGS \
        "console=ttyO2,115200n8\0" \
        "fdtfile=undefined\0" \
        "bootpart=0:2\0" \
@@ -114,14 +99,7 @@
        "bootfile=zImage\0" \
        "usbtty=cdc_acm\0" \
        "vram=16M\0" \
-       "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
        "loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \
-       "mmcboot=echo Booting from mmc${mmcdev} ...; " \
-               "run args_mmc; " \
-               "if run loadimage; then " \
-                       "run loadfdt; " \
-                       "bootz ${loadaddr} - ${fdtaddr}; " \
-               "fi;\0" \
        "uimageboot=echo Booting from mmc${mmcdev} ...; " \
                "run args_mmc; " \
                "bootm ${loadaddr}\0" \
@@ -138,7 +116,6 @@
                        "setenv fdtfile omap4-duovero-parlor.dtb; fi;" \
                "if test $fdtfile = undefined; then " \
                        "echo WARNING: Could not determine device tree to use; fi; \0" \
-       "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
        BOOTENV
 
 /*
@@ -147,19 +124,12 @@
  * SPL is overlapped with public stack and breaking non HS devices to boot.
  * So moving TEXT_BASE down to non-HS limit.
  */
-#define CONFIG_SPL_TEXT_BASE           0x40300000
-#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
 #define CONFIG_SYS_SPL_ARGS_ADDR       (CONFIG_SYS_SDRAM_BASE + \
                                         (128 << 20))
 
-#ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_AM33XX_BCH     /* ELM support */
-#endif
-
 #ifdef CONFIG_SPL_BUILD
 /* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */
 #undef CONFIG_SYS_I2C
-#undef CONFIG_SYS_I2C_OMAP24XX
 #endif
 
 #endif /* __CONFIG_TI_OMAP4_COMMON_H */