+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2010
* Texas Instruments Incorporated.
* Steve Sakoman <steve@sakoman.com>
*
* TI OMAP4 common configuration settings
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_TI_OMAP4_COMMON_H
#define __CONFIG_TI_OMAP4_COMMON_H
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP4430 1 /* which is in a 4430 */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_DISPLAY_CPUINFO 1
-#define CONFIG_DISPLAY_BOARDINFO 1
-
-#define CONFIG_SYS_THUMB_BUILD
-
#ifndef CONFIG_SYS_L2CACHE_OFF
-#define CONFIG_SYS_L2_PL310 1
-#define CONFIG_SYS_PL310_BASE 0x48242000
+#define CFG_SYS_PL310_BASE 0x48242000
#endif
/* Get CPU defs */
#include <asm/arch/omap.h>
/* Use General purpose timer 1 */
-#define CONFIG_SYS_TIMERBASE GPT2_BASE
-
-/*
- * Total Size Environment - 128k
- */
-#define CONFIG_ENV_SIZE (128 << 10)
-
-/*
- * For the DDR timing information we can either dynamically determine
- * the timings to use or use pre-determined timings (based on using the
- * dynamic method. Default to the static timing infomation.
- */
-#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
-#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-#endif
+#define CFG_SYS_TIMERBASE GPT2_BASE
#include <configs/ti_armv7_omap.h>
/*
* Hardware drivers
*/
-#define CONFIG_SYS_NS16550_CLK 48000000
+#define CFG_SYS_NS16550_CLK 48000000
#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL)
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_COM3 UART3_BASE
+#define CFG_SYS_NS16550_COM3 UART3_BASE
#endif
-#define CONFIG_CONS_INDEX 3
-
-/* TWL6030 */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_TWL6030_POWER 1
-#endif
-
-/* USB */
-#define CONFIG_USB_MUSB_UDC 1
-#define CONFIG_USB_OMAP3 1
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE 1
-#define CONFIG_USB_TTY 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
/*
* Environment setup
func(PXE, pxe, na) \
func(DHCP, dhcp, na)
-#define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
- "run envboot; " \
- "run distro_bootcmd"
-
#include <config_distro_bootcmd.h>
+#include <environment/ti/mmc.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
+ DEFAULT_FIT_TI_ARGS \
"console=ttyO2,115200n8\0" \
"fdtfile=undefined\0" \
"bootpart=0:2\0" \
"bootfile=zImage\0" \
"usbtty=cdc_acm\0" \
"vram=16M\0" \
- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
"loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \
- "mmcboot=echo Booting from mmc${mmcdev} ...; " \
- "run args_mmc; " \
- "if run loadimage; then " \
- "run loadfdt; " \
- "bootz ${loadaddr} - ${fdtaddr}; " \
- "fi;\0" \
"uimageboot=echo Booting from mmc${mmcdev} ...; " \
"run args_mmc; " \
"bootm ${loadaddr}\0" \
"setenv fdtfile omap4-duovero-parlor.dtb; fi;" \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi; \0" \
- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
BOOTENV
/*
* SPL is overlapped with public stack and breaking non HS devices to boot.
* So moving TEXT_BASE down to non-HS limit.
*/
-#define CONFIG_SPL_TEXT_BASE 0x40300000
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
-#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
- (128 << 20))
-
-#ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
-#endif
#ifdef CONFIG_SPL_BUILD
/* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */
-#undef CONFIG_SYS_I2C
-#undef CONFIG_SYS_I2C_OMAP24XX
#endif
#endif /* __CONFIG_TI_OMAP4_COMMON_H */