+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2010
* Texas Instruments Incorporated.
* Steve Sakoman <steve@sakoman.com>
*
* TI OMAP4 common configuration settings
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_TI_OMAP4_COMMON_H
#define __CONFIG_TI_OMAP4_COMMON_H
-#define CONFIG_MISC_INIT_R
-
#ifndef CONFIG_SYS_L2CACHE_OFF
-#define CONFIG_SYS_L2_PL310 1
-#define CONFIG_SYS_PL310_BASE 0x48242000
+#define CFG_SYS_PL310_BASE 0x48242000
#endif
/* Get CPU defs */
#include <asm/arch/omap.h>
/* Use General purpose timer 1 */
-#define CONFIG_SYS_TIMERBASE GPT2_BASE
-
-/*
- * Total Size Environment - 128k
- */
-#define CONFIG_ENV_SIZE (128 << 10)
-
-/*
- * For the DDR timing information we can either dynamically determine
- * the timings to use or use pre-determined timings (based on using the
- * dynamic method. Default to the static timing infomation.
- */
-#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
-#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-#endif
+#define CFG_SYS_TIMERBASE GPT2_BASE
#include <configs/ti_armv7_omap.h>
/*
* Hardware drivers
*/
-#define CONFIG_SYS_NS16550_CLK 48000000
+#define CFG_SYS_NS16550_CLK 48000000
#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL)
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_COM3 UART3_BASE
-#endif
-#define CONFIG_CONS_INDEX 3
-
-/* TWL6030 */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_TWL6030_POWER 1
+#define CFG_SYS_NS16550_COM3 UART3_BASE
#endif
-/* USB */
-#define CONFIG_USB_MUSB_UDC 1
-#define CONFIG_USB_OMAP3 1
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE 1
-#define CONFIG_USB_TTY 1
-
/*
* Environment setup
*/
func(PXE, pxe, na) \
func(DHCP, dhcp, na)
-#define CONFIG_BOOTCOMMAND \
- "if test ${boot_fit} -eq 1; then " \
- "run update_to_fit;" \
- "fi;" \
- "run findfdt; " \
- "run envboot; " \
- "run distro_bootcmd"
-
#include <config_distro_bootcmd.h>
#include <environment/ti/mmc.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
DEFAULT_FIT_TI_ARGS \
* SPL is overlapped with public stack and breaking non HS devices to boot.
* So moving TEXT_BASE down to non-HS limit.
*/
-#define CONFIG_SPL_TEXT_BASE 0x40300000
-#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
- (128 << 20))
-
-#ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
-#endif
#ifdef CONFIG_SPL_BUILD
/* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */
-#undef CONFIG_SYS_I2C
#endif
#endif /* __CONFIG_TI_OMAP4_COMMON_H */