Merge branch 'master_sh/gen4/mmcfix' of https://source.denx.de/u-boot/custodians...
[platform/kernel/u-boot.git] / include / configs / ti_armv7_keystone2.h
index 57f013c..a47f090 100644 (file)
 /* U-Boot Build Configuration */
 
 /* SoC Configuration */
-#define CONFIG_SPL_TARGET              "u-boot-spi.gph"
 
 /* Memory Configuration */
-#define CONFIG_SYS_LPAE_SDRAM_BASE     0x800000000
-#define CONFIG_MAX_RAM_BANK_SIZE       (2 << 30)       /* 2GB */
-#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_ISW_ENTRY_ADDR - \
-                                       GENERATED_GBL_DATA_SIZE)
+#define CFG_SYS_LPAE_SDRAM_BASE        0x800000000
+#define CFG_MAX_RAM_BANK_SIZE  (2 << 30)       /* 2GB */
 
 #ifdef CONFIG_SYS_MALLOC_F_LEN
 #define SPL_MALLOC_F_SIZE      CONFIG_SYS_MALLOC_F_LEN
 #endif
 
 /* SPL SPI Loader Configuration */
-#define CONFIG_SPL_PAD_TO              65536
-#define CONFIG_SPL_MAX_SIZE            (CONFIG_SPL_PAD_TO - 8)
-#define CONFIG_SPL_BSS_START_ADDR      (CONFIG_ISW_ENTRY_ADDR + \
-                                       CONFIG_SPL_MAX_SIZE)
-#define CONFIG_SPL_BSS_MAX_SIZE                (32 * 1024)
-#define CONFIG_SYS_SPL_MALLOC_START    (CONFIG_SPL_BSS_START_ADDR + \
-                                       CONFIG_SPL_BSS_MAX_SIZE)
-#define CONFIG_SYS_SPL_MALLOC_SIZE     (32 * 1024)
 #define KEYSTONE_SPL_STACK_SIZE                (8 * 1024)
-#define CONFIG_SPL_STACK               (CONFIG_SYS_SPL_MALLOC_START + \
-                                       CONFIG_SYS_SPL_MALLOC_SIZE + \
-                                       SPL_MALLOC_F_SIZE + \
-                                       KEYSTONE_SPL_STACK_SIZE - 4)
 
 /* SRAM scratch space entries  */
-#define SRAM_SCRATCH_SPACE_ADDR        CONFIG_SPL_STACK + 0x8
+#define SRAM_SCRATCH_SPACE_ADDR                0xc0c23fc
 
 #define TI_SRAM_SCRATCH_BOARD_EEPROM_START     (SRAM_SCRATCH_SPACE_ADDR)
 #define TI_SRAM_SCRATCH_BOARD_EEPROM_END       (SRAM_SCRATCH_SPACE_ADDR + 0x200)
 #define KEYSTONE_SRAM_SCRATCH_SPACE_END                (TI_SRAM_SCRATCH_BOARD_EEPROM_END)
 
 /* UART Configuration */
-#define CONFIG_SYS_NS16550_MEM32
-#define CONFIG_SYS_NS16550_COM1                KS2_UART0_BASE
-#define CONFIG_SYS_NS16550_COM2                KS2_UART1_BASE
+#define CFG_SYS_NS16550_COM1           KS2_UART0_BASE
+#define CFG_SYS_NS16550_COM2           KS2_UART1_BASE
 
 #ifndef CONFIG_SOC_K2G
-#define CONFIG_SYS_NS16550_CLK         ks_clk_get_rate(KS2_CLK1_6)
+#define CFG_SYS_NS16550_CLK            ks_clk_get_rate(KS2_CLK1_6)
 #else
-#define CONFIG_SYS_NS16550_CLK         ks_clk_get_rate(uart_pll_clk) / 2
+#define CFG_SYS_NS16550_CLK            ks_clk_get_rate(uart_pll_clk) / 2
 #endif
 
 /* SPI Configuration */
-#define CONFIG_SYS_SPI_CLK             ks_clk_get_rate(KS2_CLK1_6)
-
-/* Network Configuration */
-#define CONFIG_SYS_SGMII_REFCLK_MHZ    312
-#define CONFIG_SYS_SGMII_LINERATE_MHZ  1250
-#define CONFIG_SYS_SGMII_RATESCALE     2
+#define CFG_SYS_SPI_CLK                ks_clk_get_rate(KS2_CLK1_6)
 
 /* Keystone net */
-#define CONFIG_KSNET_MAC_ID_BASE               KS2_MAC_ID_BASE_ADDR
-#define CONFIG_KSNET_NETCP_BASE                        KS2_NETCP_BASE
-#define CONFIG_KSNET_SERDES_SGMII_BASE         KS2_SGMII_SERDES_BASE
-#define CONFIG_KSNET_SERDES_SGMII2_BASE                KS2_SGMII_SERDES2_BASE
-#define CONFIG_KSNET_SERDES_LANES_PER_SGMII    KS2_LANES_PER_SGMII_SERDES
-
-/* I2C Configuration */
-#define CONFIG_SYS_DAVINCI_I2C_SPEED   100000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE   0x10 /* SMBus host address */
-#define CONFIG_SYS_DAVINCI_I2C_SPEED1  100000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE1  0x10 /* SMBus host address */
-#define CONFIG_SYS_DAVINCI_I2C_SPEED2  100000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE2  0x10 /* SMBus host address */
+#define CFG_KSNET_MAC_ID_BASE          KS2_MAC_ID_BASE_ADDR
+#define CFG_KSNET_NETCP_BASE                   KS2_NETCP_BASE
+#define CFG_KSNET_SERDES_SGMII_BASE            KS2_SGMII_SERDES_BASE
+#define CFG_KSNET_SERDES_SGMII2_BASE           KS2_SGMII_SERDES2_BASE
+#define CFG_KSNET_SERDES_LANES_PER_SGMII       KS2_LANES_PER_SGMII_SERDES
 
 /* EEPROM definitions */
 
 /* NAND Configuration */
-#define CONFIG_SYS_NAND_MASK_CLE               0x4000
-#define CONFIG_SYS_NAND_MASK_ALE               0x2000
-#define CONFIG_SYS_NAND_CS                     2
-#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
+#define CFG_SYS_NAND_MASK_CLE          0x4000
+#define CFG_SYS_NAND_MASK_ALE          0x2000
+#define CFG_SYS_NAND_CS                        2
 
-#define CONFIG_SYS_NAND_LARGEPAGE
-#define CONFIG_SYS_NAND_BASE_LIST              { 0x30000000, }
-#define CONFIG_SYS_MAX_NAND_DEVICE             1
-#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
+#define CFG_SYS_NAND_LARGEPAGE
+#define CFG_SYS_NAND_BASE_LIST         { 0x30000000, }
 
 #define DFU_ALT_INFO_MMC \
        "dfu_alt_info_mmc=" \
                "rproc load ${dev_pmmc} ${loadaddr} 0x${filesize}; "    \
                "rproc start ${dev_pmmc}\0"                             \
 
-#define CONFIG_EXTRA_ENV_SETTINGS                                      \
+#define CFG_EXTRA_ENV_SETTINGS                                 \
        DEFAULT_LINUX_BOOT_ENV                                          \
        ENV_KS2_BOARD_SETTINGS                                          \
        DFUARGS                                                         \
                "sf write ${loadaddr} 0 ${filesize}\0"          \
        "burn_uboot_nand=nand erase 0 0x100000; "                       \
                "nand write ${loadaddr} 0 ${filesize}\0"                \
-       "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1 "   \
+       "args_all=setenv bootargs console=ttyS0,115200n8 rootwait "     \
                KERNEL_MTD_PARTS                                        \
        "args_net=setenv bootargs ${bootargs} rootfstype=nfs "          \
                "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root},"     \
        "args_ramfs=setenv bootargs ${bootargs} "                       \
                "rdinit=/sbin/init rw root=/dev/ram0 "                  \
                "initrd=0x808080000,80M\0"                              \
-       "no_post=1\0"                                                   \
-       "mtdparts=mtdparts=davinci_nand.0:"                             \
-               "1024k(bootloader)ro,512k(params)ro,-(ubifs)\0"
+       "no_post=1\0"
 
 /* Now for the remaining common defines */
 #include <configs/ti_armv7_common.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/clock.h>
 #ifndef CONFIG_SOC_K2G
-#define CONFIG_SYS_HZ_CLOCK            ks_clk_get_rate(KS2_CLK1_6)
+#define CFG_SYS_HZ_CLOCK               ks_clk_get_rate(KS2_CLK1_6)
 #else
-#define CONFIG_SYS_HZ_CLOCK            get_external_clk(sys_clk)
+#define CFG_SYS_HZ_CLOCK               get_external_clk(sys_clk)
 #endif
 
 #endif /* __CONFIG_KS2_EVM_H */