#define CONFIG_SOC_KEYSTONE
/* U-Boot Build Configuration */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */
/* SoC Configuration */
#define CONFIG_SPL_TARGET "u-boot-spi.gph"
/* UART Configuration */
#define CONFIG_SYS_NS16550_MEM32
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL)
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#endif
#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE
#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE
/* SPI Configuration */
#define CONFIG_SYS_SPI_CLK ks_clk_get_rate(KS2_CLK1_6)
-#define CONFIG_SYS_SPI0
-#define CONFIG_SYS_SPI_BASE KS2_SPI0_BASE
-#define CONFIG_SYS_SPI0_NUM_CS 4
-#define CONFIG_SYS_SPI1
-#define CONFIG_SYS_SPI1_BASE KS2_SPI1_BASE
-#define CONFIG_SYS_SPI1_NUM_CS 4
-#define CONFIG_SYS_SPI2
-#define CONFIG_SYS_SPI2_BASE KS2_SPI2_BASE
-#define CONFIG_SYS_SPI2_NUM_CS 4
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_SPI
-#undef CONFIG_DM_SPI_FLASH
-#endif
/* Network Configuration */
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_NET_RETRY_COUNT 32
#define CONFIG_SYS_SGMII_REFCLK_MHZ 312
#define CONFIG_SYS_SGMII_LINERATE_MHZ 1250
#define CONFIG_SYS_DAVINCI_I2C_SLAVE2 0x10 /* SMBus host address */
/* EEPROM definitions */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
/* NAND Configuration */
#define CONFIG_KEYSTONE_RBL_NAND
#define CONFIG_TIMESTAMP
/* EDMA3 */
-#define CONFIG_TI_EDMA3
#define KERNEL_MTD_PARTS \
"mtdparts=" \
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
- CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
+ ENV_KS2_BOARD_SETTINGS \
DFUARGS \
"bootdir=/boot\0" \
"tftp_root=/\0" \
"nfs_root=/export\0" \
"mem_lpae=1\0" \
+ "uinitrd_fixup=1\0" \
"addr_ubi=0x82000000\0" \
"addr_secdb_key=0xc000000\0" \
"name_kern=zImage\0" \