+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* ti_am335x_common.h
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
- * SPDX-License-Identifier: GPL-2.0+
- *
* For more details, please see the technical documents listed at
* http://www.ti.com/product/am3359#technicaldocuments
*/
#ifndef __CONFIG_TI_AM335X_COMMON_H__
#define __CONFIG_TI_AM335X_COMMON_H__
-#define CONFIG_AM33XX
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_SYS_CACHELINE_SIZE 64
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
-#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
#include <asm/arch/omap.h>
/* NS16550 Configuration */
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_NS16550_SERIAL
+#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#endif
+#endif
#define CONFIG_SYS_NS16550_CLK 48000000
-/* Network defines. */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_CMD_PING
-#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
-#define CONFIG_MII /* Required in net/eth.c */
-
-/*
- * RTC related defines. To use bootcount you must set bootlimit in the
- * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT
- * in the board config.
- */
-#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
-
-/* Enable the HW watchdog, since we can use this with bootcount */
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_OMAP_WATCHDOG
-
/*
* SPL related defines. The Public RAM memory map the ROM defines the
* area between 0x402F0400 and 0x4030B800 as a download area and
* supports X-MODEM loading via UART, and we leverage this and then use
* Y-MODEM to load u-boot.img, when booted over UART.
*/
-#define CONFIG_SPL_TEXT_BASE 0x402F0400
-#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE)
-#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
- (128 << 20))
/* Enable the watchdog inside of SPL */
-#define CONFIG_SPL_WATCHDOG_SUPPORT
/*
* Since SPL did pll and ddr initialization for us,
* we don't need to do it twice.
*/
-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
/*
* When building U-Boot such that there is no previous loader
* we need to call board_early_init_f. This is taken care of in
* s_init when we have SPL used.
*/
-#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
-#define CONFIG_BOARD_EARLY_INIT_F
-#endif
-
-#ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
-#endif
/* Now bring in the rest of the common code. */
#include <configs/ti_armv7_omap.h>