Convert CONFIG_PCI_GT64120 to Kconfig

[platform/kernel/u-boot.git] / include / configs / ti814x_evm.h

diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index cc32729..97166e0 100644 (file)
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -18,13 +18,6 @@
 
 #include <asm/arch/omap.h>
 
-#define CONFIG_SYS_MALLOC_LEN          (1024 << 10)
-#define CONFIG_MACH_TYPE               MACH_TYPE_TI8148EVM
-
-#define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs  */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG              /* for ramdisk support */
-
 /* commands to include */
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -63,35 +56,12 @@
                "bootm ${loadaddr}\0" \
        "fdtfile=ti814x-evm.dtb\0" \
 
-#define CONFIG_BOOTCOMMAND \
-       "mmc dev ${mmcdev}; if mmc rescan; then " \
-               "echo SD/MMC found on device ${mmcdev};" \
-               "if run loadbootenv; then " \
-                       "echo Loaded environment from ${bootenv};" \
-                       "run importbootenv;" \
-               "fi;" \
-               "if test -n $uenvcmd; then " \
-                       "echo Running uenvcmd ...;" \
-                       "run uenvcmd;" \
-               "fi;" \
-               "if run loaduimage; then " \
-                       "run mmcboot;" \
-               "fi;" \
-       "fi;" \
-
 /* Clock Defines */
 #define V_OSCK                 24000000        /* Clock output from T2 */
 #define V_SCLK                 (V_OSCK >> 1)
 
 
 /* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE              512
-
-#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START \
-                                       + PHYS_DRAM_1_SIZE - (8 << 12))
-
-#define CONFIG_SYS_LOAD_ADDR           0x81000000      /* Default */
 
 /**
  * Physical Memory Map
@@ -100,14 +70,11 @@
 #define CONFIG_MAX_RAM_BANK_SIZE       (1024 << 20)    /* 1024MB */
 
 #define CONFIG_SYS_SDRAM_BASE          0x80000000
-#define CONFIG_SYS_INIT_SP_ADDR                (NON_SECURE_SRAM_END - \
-                                        GENERATED_GBL_DATA_SIZE)
 
 /**
  * Platform/Board specific defs
  */
 #define CONFIG_SYS_TIMERBASE           0x4802E000
-#define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
 
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550_SERIAL
@@ -117,17 +84,7 @@
 
 /* CPU */
 
-#define CONFIG_ENV_OVERWRITE
-
 /* Defines for SPL */
-#define CONFIG_SPL_MAX_SIZE            (SRAM_SCRATCH_SPACE_ADDR - \
-                                        CONFIG_SPL_TEXT_BASE)
-
-#define CONFIG_SPL_BSS_START_ADDR      0x80000000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x80000         /* 512 KB */
-
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
 #define CONFIG_SYS_SPI_U_BOOT_SIZE     0x40000
 
@@ -137,21 +94,13 @@
  * header. That is 0x800FFFC0--0x80800000 should not be used for any
  * other needs.
  */
-#define CONFIG_SYS_SPL_MALLOC_START    0x80208000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
 
 /*
  * Since SPL did pll and ddr initialization for us,
  * we don't need to do it twice.
  */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
 
 /* Ethernet */
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT         10
 #define CONFIG_PHY_ET1011C_TX_CLK_FIX
 
 #endif /* ! __CONFIG_TI814X_EVM_H */