#include <asm/arch/omap.h>
-#define CONFIG_SYS_MALLOC_LEN (1024 << 10)
-#define CONFIG_MACH_TYPE MACH_TYPE_TI8148EVM
-
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG /* for ramdisk support */
-
/* commands to include */
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootm ${loadaddr}\0" \
"fdtfile=ti814x-evm.dtb\0" \
-#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "echo SD/MMC found on device ${mmcdev};" \
- "if run loadbootenv; then " \
- "echo Loaded environment from ${bootenv};" \
- "run importbootenv;" \
- "fi;" \
- "if test -n $uenvcmd; then " \
- "echo Running uenvcmd ...;" \
- "run uenvcmd;" \
- "fi;" \
- "if run loaduimage; then " \
- "run mmcboot;" \
- "fi;" \
- "fi;" \
-
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK >> 1)
/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE 512
-
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
- + PHYS_DRAM_1_SIZE - (8 << 12))
-
-#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default */
/**
* Physical Memory Map
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1024MB */
#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
- GENERATED_GBL_DATA_SIZE)
/**
* Platform/Board specific defs
*/
#define CONFIG_SYS_TIMERBASE 0x4802E000
-#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550_SERIAL
/* CPU */
-#define CONFIG_ENV_OVERWRITE
-
/* Defines for SPL */
-#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
- CONFIG_SPL_TEXT_BASE)
-
-#define CONFIG_SPL_BSS_START_ADDR 0x80000000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
-
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
/*
* header. That is 0x800FFFC0--0x80800000 should not be used for any
* other needs.
*/
-#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
/*
* Since SPL did pll and ddr initialization for us,
* we don't need to do it twice.
*/
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
/* Ethernet */
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_PHY_ET1011C
#define CONFIG_PHY_ET1011C_TX_CLK_FIX
#endif /* ! __CONFIG_TI814X_EVM_H */