Convert CONFIG_IMX_VIDEO_SKIP et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / tbs2910.h

diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index a2e59ce..fcc9674 100644 (file)
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -12,58 +12,27 @@
 
 /* General configuration */
 
-#define CONFIG_MACH_TYPE               3980
-
-#define CONFIG_SYS_HZ                  1000
-
 /* Physical Memory Map */
-#define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
-#define CONFIG_SYS_INIT_SP_OFFSET \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-#define CONFIG_SYS_MALLOC_LEN          (128 * 1024 * 1024)
+#define CFG_SYS_SDRAM_BASE             MMDC0_ARB_BASE_ADDR
 
-#define CONFIG_SYS_BOOTMAPSZ           0x10000000
+#define CFG_SYS_INIT_RAM_ADDR  IRAM_BASE_ADDR
+#define CFG_SYS_INIT_RAM_SIZE  IRAM_SIZE
 
-/* Serial console */
-#define CONFIG_MXC_UART_BASE           UART1_BASE /* select UART1/UART2 */
-
-/* Framebuffer */
-#define CONFIG_IMX_HDMI
-#define CONFIG_IMX_VIDEO_SKIP
+#define CFG_SYS_BOOTMAPSZ              0x10000000
 
 /* PCI */
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_PCIE_IMX
 #define CONFIG_PCIE_IMX_PERST_GPIO     IMX_GPIO_NR(7, 12)
 #endif
 
-/* SATA */
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE     1
-#define CONFIG_DWC_AHSATA_PORT_ID      0
-#define CONFIG_DWC_AHSATA_BASE_ADDR    SATA_ARB_BASE_ADDR
-#define CONFIG_LBA48
-#define CONFIG_SYS_64BIT_LBA
-#endif
-
 /* USB */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #ifdef CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USBD_HS
 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
 #endif /* CONFIG_CMD_USB      */
 
-#define CONFIG_BOARD_SIZE_LIMIT                392192 /* (CONFIG_ENV_OFFSET - 1024) */
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        BOOTENV \
        "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
@@ -88,10 +57,6 @@
        "pxefile_addr_r=0x10100000\0" \
        "ramdisk_addr_r=0x18080000\0" \
        "scriptaddr=0x10000000\0" \
-       "set_con_serial=setenv stdout serial; " \
-                       "setenv stderr serial\0" \
-       "set_con_hdmi=setenv stdout serial,vidconsole; " \
-                       "setenv stderr serial,vidconsole\0" \
        "stderr=serial,vidconsole\0" \
        "stdin=serial,usbkbd\0" \
        "stdout=serial,vidconsole\0"