cmd: add Kconfig option for 'date' command

[platform/kernel/u-boot.git] / include / configs / tbs2910.h

diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 640bce4..b4a14ea 100644 (file)
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -12,12 +12,9 @@
 #include "mx6_common.h"
 
 /* General configuration */
-#define CONFIG_SYS_THUMB_BUILD
 
 #define CONFIG_MACH_TYPE               3980
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 #define CONFIG_SYS_HZ                  1000
 
 #define CONFIG_IMX_THERMAL
@@ -39,26 +36,15 @@
 #define CONFIG_SYS_MEMTEST_END \
        (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
 
-#define CONFIG_SYS_BOOTMAPSZ           0x6C000000
+#define CONFIG_SYS_BOOTMAPSZ           0x10000000
 
 /* Serial console */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE /* select UART1/UART2 */
-#define CONFIG_BAUDRATE                        115200
 
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_CONSOLE_MUX
 #define CONFIG_CONS_INDEX              1
 
-#define CONFIG_PRE_CONSOLE_BUFFER
-#define CONFIG_PRE_CON_BUF_SZ          4096
-#define CONFIG_PRE_CON_BUF_ADDR                0x7C000000
-
-/* *** Command definition *** */
-#define CONFIG_CMD_BMODE
-
 /* Filesystems / image support */
-#define CONFIG_EFI_PARTITION
 
 /* MMC */
 #define CONFIG_SYS_FSL_USDHC_NUM       3
@@ -77,14 +63,9 @@
 #define CONFIG_PHY_ATHEROS
 
 /* Framebuffer */
-#define CONFIG_VIDEO
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_IPUV3_CLK               260000000
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_CFB_CONSOLE_ANSI
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
@@ -94,8 +75,6 @@
 /* PCI */
 #define CONFIG_CMD_PCI
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
 #define CONFIG_PCIE_IMX_PERST_GPIO     IMX_GPIO_NR(7, 12)
@@ -119,15 +98,12 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_USB_STORAGE
 #ifdef CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USBD_HS
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
-#define CONFIG_USB_KEYBOARD
 #ifdef CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
-#define CONFIG_SYS_STDIO_DEREGISTER
 #define CONFIG_PREBOOT \
        "usb start; " \
        "if hdmidet; then " \
@@ -139,7 +115,6 @@
 #endif /* CONFIG_CMD_USB      */
 
 /* RTC */
-#define CONFIG_CMD_DATE
 #ifdef CONFIG_CMD_DATE
 #define CONFIG_RTC_DS1307
 #define CONFIG_SYS_RTC_BUS_NUM         2