sh: tmu: Clean up CONFIG_SYS_TMU_CLK_DIV

[platform/kernel/u-boot.git] / include / configs / tbs2910.h

diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index ec0bf05..a60223c 100644 (file)
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 Soeren Moch <smoch@web.de>
  *
  * Configuration settings for the TBS2910 MatrixARM board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __TBS2910_CONFIG_H
@@ -12,18 +11,14 @@
 #include "mx6_common.h"
 
 /* General configuration */
-#define CONFIG_SYS_THUMB_BUILD
 
 #define CONFIG_MACH_TYPE               3980
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 #define CONFIG_SYS_HZ                  1000
 
 #define CONFIG_IMX_THERMAL
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
@@ -39,26 +34,13 @@
 #define CONFIG_SYS_MEMTEST_END \
        (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
 
-#define CONFIG_SYS_BOOTMAPSZ           0x6C000000
+#define CONFIG_SYS_BOOTMAPSZ           0x10000000
 
 /* Serial console */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE /* select UART1/UART2 */
-#define CONFIG_BAUDRATE                        115200
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_CONS_INDEX              1
-
-#define CONFIG_PRE_CONSOLE_BUFFER
-#define CONFIG_PRE_CON_BUF_SZ          4096
-#define CONFIG_PRE_CON_BUF_ADDR                0x7C000000
-
-/* *** Command definition *** */
-#define CONFIG_CMD_BMODE
 
 /* Filesystems / image support */
-#define CONFIG_EFI_PARTITION
 
 /* MMC */
 #define CONFIG_SYS_FSL_USDHC_NUM       3
@@ -68,70 +50,48 @@
 /* Ethernet */
 #define CONFIG_FEC_MXC
 #define CONFIG_FEC_MXC
-#define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE            RGMII
 #define CONFIG_ETHPRIME                        "FEC"
 #define CONFIG_FEC_MXC_PHYADDR         4
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
 /* Framebuffer */
-#define CONFIG_VIDEO
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
-#define CONFIG_IPUV3_CLK               260000000
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_CFB_CONSOLE_ANSI
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
-#define CONFIG_CMD_HDMIDETECT
 #endif
 
 /* PCI */
-#define CONFIG_CMD_PCI
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
 #define CONFIG_PCIE_IMX_PERST_GPIO     IMX_GPIO_NR(7, 12)
 #endif
 
 /* SATA */
-#define CONFIG_CMD_SATA
 #ifdef CONFIG_CMD_SATA
-#define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE     1
 #define CONFIG_DWC_AHSATA_PORT_ID      0
 #define CONFIG_DWC_AHSATA_BASE_ADDR    SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
-#define CONFIG_LIBATA
 #endif
 
 /* USB */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_USB_STORAGE
 #ifdef CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USBD_HS
-#define CONFIG_USB_FUNCTION_MASS_STORAGE
 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
-#define CONFIG_USB_KEYBOARD
 #ifdef CONFIG_USB_KEYBOARD
-#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
-#define CONFIG_SYS_STDIO_DEREGISTER
 #define CONFIG_PREBOOT \
+       "usb start; " \
        "if hdmidet; then " \
-               "usb start; " \
-               "run set_con_usb_hdmi; " \
+               "run set_con_hdmi; " \
        "else " \
                "run set_con_serial; " \
        "fi;"
@@ -139,7 +99,6 @@
 #endif /* CONFIG_CMD_USB      */
 
 /* RTC */
-#define CONFIG_CMD_DATE
 #ifdef CONFIG_CMD_DATE
 #define CONFIG_RTC_DS1307
 #define CONFIG_SYS_RTC_BUS_NUM         2
@@ -157,7 +116,6 @@
 #endif
 
 /* Environment organization */
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV         2 /* overwritten on SD boot */
 #define CONFIG_SYS_MMC_ENV_PART                1 /* overwritten on SD boot */
 #define CONFIG_ENV_SIZE                        (8 * 1024)
@@ -181,12 +139,13 @@
                        "bootm 0x10800000 0x10d00000\0" \
        "console=ttymxc0\0" \
        "fan=gpio set 92\0" \
-       "set_con_serial=setenv stdin serial; " \
-                       "setenv stdout serial; " \
+       "set_con_serial=setenv stdout serial; " \
                        "setenv stderr serial;\0" \
-       "set_con_usb_hdmi=setenv stdin serial,usbkbd; " \
-                       "setenv stdout serial,vga; " \
-                       "setenv stderr serial,vga;\0"
+       "set_con_hdmi=setenv stdout serial,vga; " \
+                       "setenv stderr serial,vga;\0" \
+       "stderr=serial,vga;\0" \
+       "stdin=serial,usbkbd;\0" \
+       "stdout=serial,vga;\0"
 
 #define CONFIG_BOOTCOMMAND \
        "mmc rescan; " \