+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2014 Soeren Moch <smoch@web.de>
*
* Configuration settings for the TBS2910 MatrixARM board.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __TBS2910_CONFIG_H
#define CONFIG_IMX_THERMAL
/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_MALLOC_LEN (128 * 1024 * 1024)
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END \
- (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
-
#define CONFIG_SYS_BOOTMAPSZ 0x10000000
/* Serial console */
-#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */
-/* Filesystems / image support */
-
-/* MMC */
-#define CONFIG_SYS_FSL_USDHC_NUM 3
-#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR
-#define CONFIG_SUPPORT_EMMC_BOOT
-
-/* Ethernet */
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_MXC
-#define CONFIG_MII
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 4
-#define CONFIG_PHY_ATHEROS
-
/* Framebuffer */
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
-#endif
/* PCI */
#ifdef CONFIG_CMD_PCI
#define CONFIG_DWC_AHSATA_PORT_ID 0
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
+#define CONFIG_SYS_64BIT_LBA
#endif
/* USB */
#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#ifdef CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USBD_HS
#endif /* CONFIG_CMD_USB_MASS_STORAGE */
-#ifdef CONFIG_USB_KEYBOARD
-#define CONFIG_PREBOOT \
- "usb start; " \
- "if hdmidet; then " \
- "run set_con_hdmi; " \
- "else " \
- "run set_con_serial; " \
- "fi;"
-#endif /* CONFIG_USB_KEYBOARD */
#endif /* CONFIG_CMD_USB */
-/* RTC */
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_DS1307
-#define CONFIG_SYS_RTC_BUS_NUM 2
-#endif
-
-/* I2C */
-#ifdef CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_I2C_EDID
-#endif
-
/* Environment organization */
#define CONFIG_SYS_MMC_ENV_DEV 2 /* overwritten on SD boot */
#define CONFIG_SYS_MMC_ENV_PART 1 /* overwritten on SD boot */
-#define CONFIG_ENV_SIZE (8 * 1024)
-#define CONFIG_ENV_OFFSET (384 * 1024)
#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BOARD_SIZE_LIMIT 392192 /* (CONFIG_ENV_OFFSET - 1024) */
+
#define CONFIG_EXTRA_ENV_SETTINGS \
+ BOOTENV \
"bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
"bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
"video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
"bootm 0x10800000 0x10d00000\0" \
"console=ttymxc0\0" \
"fan=gpio set 92\0" \
+ "fdt_addr=0x13000000\0" \
+ "fdt_addr_r=0x13000000\0" \
+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ "kernel_addr_r=0x10008000\0" \
+ "pxefile_addr_r=0x10008000\0" \
+ "ramdisk_addr_r=0x18000000\0" \
+ "scriptaddr=0x14000000\0" \
"set_con_serial=setenv stdout serial; " \
- "setenv stderr serial;\0" \
- "set_con_hdmi=setenv stdout serial,vga; " \
- "setenv stderr serial,vga;\0" \
- "stderr=serial,vga;\0" \
- "stdin=serial,usbkbd;\0" \
- "stdout=serial,vga;\0"
-
-#define CONFIG_BOOTCOMMAND \
- "mmc rescan; " \
- "if run bootcmd_up1; then " \
- "run bootcmd_up2; " \
- "else " \
- "run bootcmd_mmc; " \
- "fi"
+ "setenv stderr serial\0" \
+ "set_con_hdmi=setenv stdout serial,vidconsole; " \
+ "setenv stderr serial,vidconsole\0" \
+ "stderr=serial,vidconsole\0" \
+ "stdin=serial,usbkbd\0" \
+ "stdout=serial,vidconsole\0"
+
+/* Enable distro boot */
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(MMC, mmc, 1) \
+ func(MMC, mmc, 2) \
+ func(SATA, sata, 0) \
+ func(USB, usb, 0)
+
+#include <config_distro_bootcmd.h>
#endif /* __TBS2910_CONFIG_H * */