usb: Remove some unused CONFIG settings

[platform/kernel/u-boot.git] / include / configs / taurus.h

diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index 77d80bf..4758e23 100644 (file)
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -49,8 +49,8 @@
  * leaving the correct space for initial global data structure above
  * that address while providing maximum stack area below.
  */
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR       ATMEL_BASE_SRAM1
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
@@ -63,16 +63,7 @@
 #define CONFIG_SYS_NAND_READY_PIN      AT91_PIN_PC13
 #endif
 
-/* USB */
 #if defined(CONFIG_BOARD_TAURUS)
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE          0x00500000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9260"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
-
 /* USB DFU support */
 
 #define CONFIG_USB_GADGET_AT91
@@ -84,13 +75,8 @@
 /* SPI EEPROM */
 #define TAURUS_SPI_MASK (1 << 4)
 
-#if defined(CONFIG_SPL_BUILD)
-/* SPL related */
-#endif
-
 /* bootstrap in spi flash , u-boot + env + linux in nandflash */
 
-#ifndef CONFIG_SPL_BUILD
 #if defined(CONFIG_BOARD_AXM)
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \
@@ -139,21 +125,10 @@
        "stdout=serial\0" \
        "upgrade_available=0\0"
 #endif
-#endif /* #ifndef CONFIG_SPL_BUILD */
 
 /* Defines for SPL */
-#define CONFIG_SPL_MAX_SIZE            (31 * SZ_512)
-#define        CONFIG_SPL_STACK                (ATMEL_BASE_SRAM1 + SZ_16K)
-#define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE - \
-                                       CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
-
-#define CONFIG_SPL_BSS_START_ADDR      CONFIG_SPL_MAX_SIZE
-#define CONFIG_SPL_BSS_MAX_SIZE                (3 * SZ_512)
 
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
-#define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    SZ_512K
 #define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
@@ -172,7 +147,4 @@
 #define CONFIG_SYS_MCKR_CSS            (0x02 | CONFIG_SYS_MCKR)
 #define CONFIG_SYS_AT91_PLLB           0x10193F05
 
-#define CONFIG_SPL_PAD_TO              CONFIG_SYS_NAND_U_BOOT_OFFS
-#define CONFIG_SYS_SPL_LEN             CONFIG_SPL_PAD_TO
-
 #endif