configs: Migrate CMD_NAND*

[platform/kernel/u-boot.git] / include / configs / tao3530.h

diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 109b8e8..3dd7a9b 100644 (file)
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -16,9 +16,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_OMAP                    /* in a TI OMAP core */
-
-#define CONFIG_OMAP_GPIO
 
 #define CONFIG_SDRC                    /* Has an SDRC controller */
 
@@ -64,23 +61,13 @@
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
-/* GPIO banks */
-#define CONFIG_OMAP3_GPIO_2            /* GPIO32 ..63  is in GPIO bank 2 */
-#define CONFIG_OMAP3_GPIO_3            /* GPIO64 ..95  is in GPIO bank 3 */
-#define CONFIG_OMAP3_GPIO_4            /* GPIO96 ..127 is in GPIO bank 4 */
-#define CONFIG_OMAP3_GPIO_5            /* GPIO128..159 is in GPIO bank 5 */
-#define CONFIG_OMAP3_GPIO_6            /* GPIO160..191 is in GPIO bank 6 */
-
 /* commands to include */
-#define CONFIG_CMD_MTDPARTS    /* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE      /* needed for mtdparts commands */
 #define MTDIDS_DEFAULT                 "nand0=nand"
 #define MTDPARTS_DEFAULT               "mtdparts=nand:512k(x-loader),"\
                                        "1920k(u-boot),128k(u-boot-env),"\
                                        "4m(kernel),-(fs)"
 
-#define CONFIG_CMD_NAND                /* NAND support                 */
-
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_SYS_OMAP24_I2C_SPEED    100000
@@ -90,7 +77,6 @@
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_POWER
 #define CONFIG_TWL4030_LED
 
 /*
@@ -214,7 +200,6 @@
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_ONENAND_BASE                ONENAND_MAP
 
-#define CONFIG_ENV_IS_IN_NAND          1
 #define ONENAND_ENV_OFFSET             0x260000 /* environment starts here */
 #define SMNAND_ENV_OFFSET              0x260000 /* environment starts here */
 
@@ -239,11 +224,8 @@
  */
 
 /* USB EHCI */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_OMAP
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       162
 
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_SMSC95XX
 
@@ -257,7 +239,6 @@
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC