*
* Copyright (C) 2009 TechNexion Ltd.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __TAM3517_H
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_USB_STORAGE
-/* #define CONFIG_EHCI_DCACHE */
-
/* commands to include */
#include <config_cmd_default.h>
#define CONFIG_HARD_I2C
#define CONFIG_SYS_I2C_SPEED 400000
#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_SYS_I2C_BUS 0
-#define CONFIG_SYS_I2C_BUS_SELECT 1
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
*/
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
/*
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
"1m(u-boot),256k(env1)," \
"256k(env2),6m(kernel),-(rootfs)"
-#define xstr(s) str(s)
-#define str(s) #s
-
#define CONFIG_TAM3517_SETTINGS \
"netdev=eth0\0" \
"nandargs=setenv bootargs root=${nandroot} " \
"addmisc=setenv bootargs ${bootargs} ${misc}\0" \
"loadaddr=82000000\0" \
"kernel_addr_r=82000000\0" \
- "hostname=" xstr(CONFIG_HOSTNAME) "\0" \
- "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
+ "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
+ "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
"flash_self=run ramargs addip addtty addmtd addmisc;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
"run ramargs addip addtty addmtd addmisc;" \
"bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
"else echo Images not loades;fi\0" \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.img\0" \
+ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.img\0" \
"load=tftp ${loadaddr} ${u-boot}\0" \
"loadmlo=tftp ${loadaddr} ${mlo}\0" \
- "mlo=" xstr(CONFIG_HOSTNAME) "/MLO\0" \
+ "mlo=" __stringify(CONFIG_HOSTNAME) "/MLO\0" \
"uboot_addr=0x80000\0" \
"update=nandecc sw;nand erase ${uboot_addr} 100000;" \
"nand write ${loadaddr} ${uboot_addr} 80000\0" \
* I2C EEPROM
*/
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
-
/*
* The I2C EEPROM on the TAM3517 contains
* mac address and production data
unsigned char _rev[100];
};
-#define TAM3517_READ_MAC_FROM_EEPROM \
-do { \
- struct tam3517_module_info info;\
- char buf[80], ethname[20]; \
- int i; \
+#define TAM3517_READ_EEPROM(info, ret) \
+do { \
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); \
if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, \
- (void *)&info, sizeof(info))) \
- break; \
+ (void *)info, sizeof(*info))) \
+ ret = 1; \
+ else \
+ ret = 0; \
+} while (0)
+
+#define TAM3517_READ_MAC_FROM_EEPROM(info) \
+do { \
+ char buf[80], ethname[20]; \
+ int i; \
memset(buf, 0, sizeof(buf)); \
- for (i = 0 ; i < ARRAY_SIZE(info.eth_addr); i++) { \
+ for (i = 0 ; i < ARRAY_SIZE((info)->eth_addr); i++) { \
sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X", \
- info.eth_addr[i][5], \
- info.eth_addr[i][4], \
- info.eth_addr[i][3], \
- info.eth_addr[i][2], \
- info.eth_addr[i][1], \
- info.eth_addr[i][0]); \
+ (info)->eth_addr[i][5], \
+ (info)->eth_addr[i][4], \
+ (info)->eth_addr[i][3], \
+ (info)->eth_addr[i][2], \
+ (info)->eth_addr[i][1], \
+ (info)->eth_addr[i][0]); \
\
if (i) \
sprintf(ethname, "eth%daddr", i); \
setenv(ethname, buf); \
} \
} while (0)
+
+/* The following macros are taken from Technexion's documentation */
+#define TAM3517_sequence_number(info) \
+ ((info)->sequence_number % 0x1000000000000LL)
+#define TAM3517_week_of_year(info) (((info)->sequence_number >> 48) % 0x100)
+#define TAM3517_year(info) ((info)->sequence_number >> 56)
+#define TAM3517_revision_fixed(info) ((info)->revision % 0x100)
+#define TAM3517_revision_major(info) (((info)->revision >> 8) % 0x100)
+#define TAM3517_revision_tn(info) ((info)->revision >> 16)
+
+#define TAM3517_PRINT_SOM_INFO(info) \
+do { \
+ printf("Vendor:%s\n", (info)->customer); \
+ printf("SOM: %s\n", (info)->product); \
+ printf("SeqNr: %02llu%02llu%012llu\n", \
+ TAM3517_year(info), \
+ TAM3517_week_of_year(info), \
+ TAM3517_sequence_number(info)); \
+ printf("Rev: TN%u %u.%u\n", \
+ TAM3517_revision_tn(info), \
+ TAM3517_revision_major(info), \
+ TAM3517_revision_fixed(info)); \
+} while (0)
+
#endif
#endif /* __TAM3517_H */