#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_USB_STORAGE
-/* #define CONFIG_EHCI_DCACHE */
-
/* commands to include */
#include <config_cmd_default.h>
*/
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
/*
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
* I2C EEPROM
*/
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
-
/*
* The I2C EEPROM on the TAM3517 contains
* mac address and production data
unsigned char _rev[100];
};
-#define TAM3517_READ_MAC_FROM_EEPROM \
-do { \
- struct tam3517_module_info info;\
- char buf[80], ethname[20]; \
- int i; \
+#define TAM3517_READ_EEPROM(info, ret) \
+do { \
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); \
if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, \
- (void *)&info, sizeof(info))) \
- break; \
+ (void *)info, sizeof(*info))) \
+ ret = 1; \
+ else \
+ ret = 0; \
+} while (0)
+
+#define TAM3517_READ_MAC_FROM_EEPROM(info) \
+do { \
+ char buf[80], ethname[20]; \
+ int i; \
memset(buf, 0, sizeof(buf)); \
- for (i = 0 ; i < ARRAY_SIZE(info.eth_addr); i++) { \
+ for (i = 0 ; i < ARRAY_SIZE((info)->eth_addr); i++) { \
sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X", \
- info.eth_addr[i][5], \
- info.eth_addr[i][4], \
- info.eth_addr[i][3], \
- info.eth_addr[i][2], \
- info.eth_addr[i][1], \
- info.eth_addr[i][0]); \
+ (info)->eth_addr[i][5], \
+ (info)->eth_addr[i][4], \
+ (info)->eth_addr[i][3], \
+ (info)->eth_addr[i][2], \
+ (info)->eth_addr[i][1], \
+ (info)->eth_addr[i][0]); \
\
if (i) \
sprintf(ethname, "eth%daddr", i); \
setenv(ethname, buf); \
} \
} while (0)
+
+/* The following macros are taken from Technexion's documentation */
+#define TAM3517_sequence_number(info) \
+ ((info)->sequence_number % 0x1000000000000LL)
+#define TAM3517_week_of_year(info) (((info)->sequence_number >> 48) % 0x100)
+#define TAM3517_year(info) ((info)->sequence_number >> 56)
+#define TAM3517_revision_fixed(info) ((info)->revision % 0x100)
+#define TAM3517_revision_major(info) (((info)->revision >> 8) % 0x100)
+#define TAM3517_revision_tn(info) ((info)->revision >> 16)
+
+#define TAM3517_PRINT_SOM_INFO(info) \
+do { \
+ printf("Vendor:%s\n", (info)->customer); \
+ printf("SOM: %s\n", (info)->product); \
+ printf("SeqNr: %02llu%02llu%012llu\n", \
+ TAM3517_year(info), \
+ TAM3517_week_of_year(info), \
+ TAM3517_sequence_number(info)); \
+ printf("Rev: TN%u %u.%u\n", \
+ TAM3517_revision_tn(info), \
+ TAM3517_revision_major(info), \
+ TAM3517_revision_fixed(info)); \
+} while (0)
+
#endif
#endif /* __TAM3517_H */