Merge branch 'master' of git://git.denx.de/u-boot-spi

[platform/kernel/u-boot.git] / include / configs / t4qds.h

diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index c5110c2..92b2179 100644 (file)
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -29,13 +29,23 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE       CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS    0xfffffffc
+#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg
+#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg
+#endif
+
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+/* Set 1M boot space */
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
+               (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
+#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#define CONFIG_SYS_NO_FLASH
 #endif
 
 #define CONFIG_CMD_REGINFO
 
 /* High Level Configuration Options */
 #define CONFIG_BOOKE
-#define CONFIG_E6500
 #define CONFIG_E500                    /* BOOKE e500 family */
 #define CONFIG_E500MC                  /* BOOKE e500mc family */
 #define CONFIG_SYS_BOOK3E_HV           /* Category E.HV supported */
@@ -64,20 +74,22 @@
 #define CONFIG_SYS_SRIO
 #define CONFIG_SRIO1                   /* SRIO port 1 */
 #define CONFIG_SRIO2                   /* SRIO port 2 */
+#define CONFIG_SRIO_PCIE_BOOT_MASTER
 
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
 
 #define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_SYS_NO_FLASH
+#if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
 #define CONFIG_ENV_IS_NOWHERE
+#endif
 #else
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #endif
 
-#ifndef CONFIG_SYS_NO_FLASH
 #if defined(CONFIG_SPIFLASH)
 #define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_ENV_IS_IN_SPI_FLASH
@@ -99,18 +111,18 @@
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE                        CONFIG_SYS_NAND_BLOCK_SIZE
 #define CONFIG_ENV_OFFSET              (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
+#define CONFIG_ENV_IS_IN_REMOTE
+#define CONFIG_ENV_ADDR                0xffe20000
+#define CONFIG_ENV_SIZE                0x2000
+#elif defined(CONFIG_ENV_IS_NOWHERE)
+#define CONFIG_ENV_SIZE                0x2000
 #else
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 #endif
-#else /* CONFIG_SYS_NO_FLASH */
-#define CONFIG_ENV_SIZE                0x2000
-#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
-#endif
-
-
 
 #define CONFIG_SYS_CLK_FREQ    get_board_sys_clk()
 #define CONFIG_DDR_CLK_FREQ    get_board_ddr_clk()
@@ -444,11 +456,19 @@ unsigned long get_board_ddr_clk(void);
 #define I2C_MUX_PCA_ADDR_PRI           0x77 /* I2C bus multiplexer,primary */
 #define I2C_MUX_PCA_ADDR_SEC           0x76 /* I2C bus multiplexer,secondary */
 
-/* VSC Crossbar switches */
-#define CONFIG_VSC_CROSSBAR
 #define I2C_MUX_CH_DEFAULT     0x8
+#define I2C_MUX_CH_VOL_MONITOR 0xa
 #define I2C_MUX_CH_VSC3316_FS  0xc
 #define I2C_MUX_CH_VSC3316_BS  0xd
+
+/* Voltage monitor on channel 2*/
+#define I2C_VOL_MONITOR_ADDR           0x40
+#define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
+#define I2C_VOL_MONITOR_BUS_V_OVF      0x1
+#define I2C_VOL_MONITOR_BUS_V_SHIFT    3
+
+/* VSC Crossbar switches */
+#define CONFIG_VSC_CROSSBAR
 #define VSC3316_FSM_TX_ADDR    0x70
 #define VSC3316_FSM_RX_ADDR    0x71
 
@@ -624,6 +644,16 @@ unsigned long get_board_ddr_clk(void);
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 #define CONFIG_SYS_QE_FMAN_FW_ADDR     (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
+/*
+ * Slave has no ucode locally, it can fetch this from remote. When implementing
+ * in two corenet boards, slave's ucode could be stored in master's memory
+ * space, the address can be mapped from slave TLB->slave LAW->
+ * slave SRIO or PCIE outbound window->master inbound window->
+ * master LAW->the ucode address in master's memory space.
+ */
+#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
+#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xFFE00000
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #define CONFIG_SYS_QE_FMAN_FW_ADDR             0xEFF40000
@@ -641,11 +671,6 @@ unsigned long get_board_ddr_clk(void);
 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
-#define XFI_CARD_PORT1_PHY_ADDR        0x1 /* tmp, FIXME below addr */
-#define XFI_CARD_PORT2_PHY_ADDR        0x2
-#define XFI_CARD_PORT3_PHY_ADDR        0x3
-#define XFI_CARD_PORT4_PHY_ADDR        0x4
-#define QSGMII_CARD_PHY_ADDR   0x5
 #define FM1_10GEC1_PHY_ADDR    0x0
 #define FM1_10GEC2_PHY_ADDR    0x1
 #define FM2_10GEC1_PHY_ADDR    0x2
@@ -653,6 +678,7 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 #define CONFIG_E1000
@@ -783,8 +809,21 @@ unsigned long get_board_ddr_clk(void);
 
 #define __USB_PHY_TYPE utmi
 
+/*
+ * T4240 has 3 DDR controllers. Default to 3way_4KB interleaving. It can be
+ * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to
+ * cacheline interleaving. It can be cacheline, page, bank, superbank.
+ * See doc/README.fsl-ddr for details.
+ */
+#ifdef CONFIG_PPC_T4240
+#define CTRL_INTLV_PREFERED 3way_4KB
+#else
+#define CTRL_INTLV_PREFERED cacheline
+#endif
+
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
-       "hwconfig=fsl_ddr:ctlr_intlv=3way_4KB,"         \
+       "hwconfig=fsl_ddr:"                                     \
+       "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
        "bank_intlv=auto;"                                      \
        "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
        "netdev=eth0\0"                                         \