#define __CONFIG_H
/* Timers for fasp(TIMCLK) */
-#define CONFIG_SYS_TIMERBASE 0x31080000 /* AP Timer 1 (ARM-SP804) */
+#define CFG_SYS_TIMERBASE 0x31080000 /* AP Timer 1 (ARM-SP804) */
/*
* SDRAM (for initialize)
*/
-#define CONFIG_SYS_SDRAM_BASE (0x80000000) /* Start address of DDR3 */
+#define CFG_SYS_SDRAM_BASE (0x80000000) /* Start address of DDR3 */
#define PHYS_SDRAM_SIZE (0x7c000000) /* Default size (2GB - Secure memory) */
-#define CONFIG_VERY_BIG_RAM /* SynQuacer supports up to 64GB */
-#define CONFIG_MAX_MEM_MAPPED PHYS_SDRAM_SIZE
+#define CFG_MAX_MEM_MAPPED PHYS_SDRAM_SIZE
#define SQ_DRAMINFO_BASE (0x2e00ffc0) /* DRAM info from TF-A */
/*
* Boot info
*/
-#define CONFIG_SYS_INIT_SP_ADDR (0xe0000000) /* stack of init proccess */
/*
* Hardware drivers support
*/
/* RTC */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x51
+#define CFG_SYS_I2C_RTC_ADDR 0x51
/* Serial (pl011) */
#define UART_CLK (62500000)
-#define CONFIG_PL011_CLOCK UART_CLK
-#define CONFIG_PL01x_PORTS {(void *)(0x2a400000)}
+#define CFG_PL011_CLOCK UART_CLK
+#define CFG_PL01x_PORTS {(void *)(0x2a400000)}
/* Support MTD */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_FLASH_BASE (0x08000000)
-#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
-
-#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SYS_MAXARGS 128
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CFG_SYS_FLASH_BASE (0x08000000)
+#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE}
/* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */
-/* #define CONFIG_SYS_PCI_64BIT 1 */
#define DEFAULT_DFU_ALT_INFO "dfu_alt_info=" \
"mtd nor1=u-boot.bin raw 200000 100000;" \
"fip.bin raw 180000 78000;" \
"optee.bin raw 500000 100000\0"
+/* GUIDs for capsule updatable firmware images */
+#define DEVELOPERBOX_UBOOT_IMAGE_GUID \
+ EFI_GUID(0x53a92e83, 0x4ef4, 0x473a, 0x8b, 0x0d, \
+ 0xb5, 0xd8, 0xc7, 0xb2, 0xd6, 0x00)
+
+#define DEVELOPERBOX_FIP_IMAGE_GUID \
+ EFI_GUID(0x880866e9, 0x84ba, 0x4793, 0xa9, 0x08, \
+ 0x33, 0xe0, 0xb9, 0x16, 0xf3, 0x98)
+
+#define DEVELOPERBOX_OPTEE_IMAGE_GUID \
+ EFI_GUID(0xc1b629f1, 0xce0e, 0x4894, 0x82, 0xbf, \
+ 0xf0, 0xa3, 0x83, 0x87, 0xe6, 0x30)
+
/* Distro boot settings */
-#ifndef CONFIG_SPL_BUILD
#ifdef CONFIG_CMD_USB
#define BOOT_TARGET_DEVICE_USB(func) func(USB, usb, 0)
#else
BOOT_TARGET_DEVICE_NVME(func) \
#include <config_distro_bootcmd.h>
-#else /* CONFIG_SPL_BUILD */
-#define BOOTENV
-#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_addr_r=0x9fe00000\0" \
"kernel_addr_r=0x90000000\0" \
"ramdisk_addr_r=0xa0000000\0" \