Convert CONFIG_CMD_EEPROM et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / suvd3.h

diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h
index bbf9da5..af8730a 100644 (file)
--- a/include/configs/suvd3.h
+++ b/include/configs/suvd3.h
@@ -11,10 +11,7 @@
  * (C) Copyright 2010
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -32,13 +29,48 @@
 #define CONFIG_KM_BOARD_NAME   "suvd3"
 /* include common defines/options for all 8321 Keymile boards */
 #include "km/km8321-common.h"
+
 #elif defined(CONFIG_KMVECT1)   /* VECT1 board specific */
 #define CONFIG_HOSTNAME                kmvect1
 #define CONFIG_KM_BOARD_NAME   "kmvect1"
+/* at end of uboot partition, before env */
+#define CONFIG_SYS_QE_FW_ADDR   0xF00B0000
+/* include common defines/options for all 8309 Keymile boards */
+#include "km/km8309-common.h"
+
+#elif defined(CONFIG_KMTEGR1)   /* TEGR1 board specific */
+#define CONFIG_HOSTNAME   kmtegr1
+#define CONFIG_KM_BOARD_NAME   "kmtegr1"
+#define CONFIG_KM_UBI_PARTITION_NAME_BOOT      "ubi0"
+#define CONFIG_KM_UBI_PARTITION_NAME_APP       "ubi1"
+#define MTDIDS_DEFAULT                 "nor0=boot,nand0=app"
+#define MTDPARTS_DEFAULT               "mtdparts="                     \
+       "boot:"                                                         \
+               "768k(u-boot),"                                         \
+               "256k(qe-fw),"                                          \
+               "128k(env),"                                            \
+               "128k(envred),"                                         \
+               "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"             \
+       "app:"                                                          \
+               "-(" CONFIG_KM_UBI_PARTITION_NAME_APP ");"
+
+#define CONFIG_ENV_ADDR                0xF0100000
+#define CONFIG_ENV_OFFSET      0x100000
+
+#define CONFIG_CMD_NAND
+#define CONFIG_NAND_ECC_BCH
+#define CONFIG_BCH
+#define CONFIG_NAND_KMETER1
+#define CONFIG_SYS_MAX_NAND_DEVICE             1
+#define NAND_MAX_CHIPS                         1
+
 /* include common defines/options for all 8309 Keymile boards */
 #include "km/km8309-common.h"
+/* must be after the include because KMBEC_FPGA is otherwise undefined */
+#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
+
 #else
-#error Supported boards are: SUVD3, KMVECT1
+#error Supported boards are: SUVD3, KMVECT1, KMTEGR1
 #endif
 
 #define CONFIG_SYS_APP1_BASE           0xA0000000
@@ -59,6 +91,7 @@
  *
  */
 
+#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
 /*
  * APP1 on the local bus CS2
  */
@@ -85,14 +118,26 @@
                         0x0000c000 | \
                         MxMR_WLFx_2X)
 
+#elif defined(CONFIG_KMTEGR1)
+#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
+                                BR_PS_16 | \
+                                BR_MS_GPCM | \
+                                BR_V)
+
+#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
+                                OR_GPCM_SCY_5 | \
+                                OR_GPCM_TRLX_CLEAR | \
+                                OR_GPCM_EHTR_CLEAR)
+
+#endif /* CONFIG_KMTEGR1 */
+
 #define CONFIG_SYS_LBLAWBAR3_PRELIM    CONFIG_SYS_APP2_BASE
 #define CONFIG_SYS_LBLAWAR3_PRELIM     (LBLAWAR_EN | LBLAWAR_256MB)
 
 /*
  * MMU Setup
  */
-
-
+#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
 /* APP1:  icache cacheable, but dcache-inhibit and guarded */
 #define CONFIG_SYS_IBAT5L      (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
                                 BATL_MEMCOHERENCE)
@@ -102,6 +147,13 @@
                                 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_DBAT5U      CONFIG_SYS_IBAT5U
 
+#elif defined(CONFIG_KMTEGR1)
+#define CONFIG_SYS_IBAT5L (0)
+#define CONFIG_SYS_IBAT5U (0)
+#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
+#endif /* CONFIG_KMTEGR1 */
+
 #define CONFIG_SYS_IBAT6L      (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
                                 BATL_MEMCOHERENCE)
 #define CONFIG_SYS_IBAT6U      (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \
@@ -134,7 +186,9 @@
 #define CONFIG_SYS_UEC1_PHY_ADDR       CONFIG_SYS_FIXED_PHY_ADDR
 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
 #define CONFIG_SYS_UEC1_INTERFACE_SPEED        100
+#endif /* CONFIG_KMVECT1 */
 
+#if defined(CONFIG_KMVECT1) || defined(CONFIG_KMTEGR1)
 /* ethernet port connected to piggy (UEC2) */
 #define CONFIG_HAS_ETH1
 #define CONFIG_UEC_ETH2
@@ -145,6 +199,6 @@
 #define CONFIG_SYS_UEC2_PHY_ADDR       0
 #define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 #define CONFIG_SYS_UEC2_INTERFACE_SPEED        100
-#endif /* CONFIG_KMVECT1 */
+#endif /* CONFIG_KMVECT1 || CONFIG_KMTEGR1 */
 
 #endif /* __CONFIG_H */