+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2006 Freescale Semiconductor, Inc.
* Dave Liu <daveliu@freescale.com>
*
* (C) Copyright 2010
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
*/
#ifndef __CONFIG_H
/*
* High Level Configuration Options
*/
-#define CONFIG_SUVD3 /* SUVD3 board specific */
-#define CONFIG_HOSTNAME suvd3
-#define CONFIG_KM_BOARD_NAME "suvd3"
-#define CONFIG_SYS_TEXT_BASE 0xF0000000
+/* This needs to be set prior to including km/km83xx-common.h */
+#if defined(CONFIG_SUVD3) /* SUVD3 board specific */
+#define CONFIG_HOSTNAME "suvd3"
+#define CONFIG_KM_BOARD_NAME "suvd3"
/* include common defines/options for all 8321 Keymile boards */
#include "km/km8321-common.h"
+#elif defined(CONFIG_KMVECT1) /* VECT1 board specific */
+#define CONFIG_HOSTNAME "kmvect1"
+#define CONFIG_KM_BOARD_NAME "kmvect1"
+/* at end of uboot partition, before env */
+#define CONFIG_SYS_QE_FW_ADDR 0xF00B0000
+/* include common defines/options for all 8309 Keymile boards */
+#include "km/km8309-common.h"
+
+#elif defined(CONFIG_KMTEGR1) /* TEGR1 board specific */
+#define CONFIG_HOSTNAME "kmtegr1"
+#define CONFIG_KM_BOARD_NAME "kmtegr1"
+#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0"
+#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1"
+
+#define CONFIG_ENV_ADDR 0xF0100000
+#define CONFIG_ENV_OFFSET 0x100000
+
+#define CONFIG_NAND_ECC_BCH
+#define CONFIG_NAND_KMETER1
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+
+/* include common defines/options for all 8309 Keymile boards */
+#include "km/km8309-common.h"
+/* must be after the include because KMBEC_FPGA is otherwise undefined */
+#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
+
+#else
+#error Supported boards are: SUVD3, KMVECT1, KMTEGR1
+#endif
+
#define CONFIG_SYS_APP1_BASE 0xA0000000
-#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
+#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
#define CONFIG_SYS_APP2_BASE 0xB0000000
-#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */
+#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */
/* EEprom support */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
*
*/
+#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
/*
* APP1 on the local bus CS2
*/
0x0000c000 | \
MxMR_WLFx_2X)
+#elif defined(CONFIG_KMTEGR1)
+#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
+ BR_PS_16 | \
+ BR_MS_GPCM | \
+ BR_V)
+
+#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
+ OR_GPCM_SCY_5 | \
+ OR_GPCM_TRLX_CLEAR | \
+ OR_GPCM_EHTR_CLEAR)
+
+#endif /* CONFIG_KMTEGR1 */
+
#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE
#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
/*
* MMU Setup
*/
-
-
+#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
/* APP1: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
BATL_MEMCOHERENCE)
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
+#elif defined(CONFIG_KMTEGR1)
+#define CONFIG_SYS_IBAT5L (0)
+#define CONFIG_SYS_IBAT5U (0)
+#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
+#endif /* CONFIG_KMTEGR1 */
+
#define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
+/*
+ * QE UEC ethernet configuration
+ */
+#if defined(CONFIG_KMVECT1)
+#define CONFIG_MV88E6352_SWITCH
+#define CONFIG_KM_MVEXTSW_ADDR 0x10
+
+/* ethernet port connected to simple switch 88e6122 (UEC0) */
+#define CONFIG_UEC_ETH1
+#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
+#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9
+#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
+
+#define CONFIG_FIXED_PHY 0xFFFFFFFF
+#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */
+#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \
+ {devnum, speed, duplex}
+#define CONFIG_SYS_FIXED_PHY_PORTS \
+ CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL)
+
+#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
+#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
+#endif /* CONFIG_KMVECT1 */
+
+#if defined(CONFIG_KMVECT1) || defined(CONFIG_KMTEGR1)
+/* ethernet port connected to piggy (UEC2) */
+#define CONFIG_HAS_ETH1
+#define CONFIG_UEC_ETH2
+#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */
+#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
+#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12
+#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
+#define CONFIG_SYS_UEC2_PHY_ADDR 0
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
+#endif /* CONFIG_KMVECT1 || CONFIG_KMTEGR1 */
+
#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff