#define CONFIG_SYS_TEXT_BASE 0x4a000000
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM)
+# define CONFIG_CMD_DM
+# define CONFIG_DM_GPIO
+# define CONFIG_DM_SERIAL
+# define CONFIG_DW_SERIAL
+# define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
+#endif
+
/*
* Display CPU information
*/
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
/* ns16550 reg in the low bits of cpu reg */
-#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_CLK 24000000
-#define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE
-#define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE
-#define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE
-#define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE
+#ifndef CONFIG_DM_SERIAL
+# define CONFIG_SYS_NS16550_REG_SIZE -4
+# define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE
+# define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE
+# define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE
+# define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE
+# define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE
+#endif
/* DRAM Base */
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define CONFIG_INITRD_TAG
/* mmc config */
+#if !defined(CONFIG_UART0_PORT_F)
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_MMC
#define CONFIG_MMC_SUNXI_SLOT 0
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */
+#endif
/* 4MB of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
* Miscellaneous configurable options
*/
#define CONFIG_CMD_ECHO
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_GENERIC_BOARD
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_LOAD_ADDR 0x48000000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */
/* standalone support */
-#define CONFIG_STANDALONE_LOAD_ADDR 0x48000000
-
-#define CONFIG_SYS_HZ 1000
+#define CONFIG_STANDALONE_LOAD_ADDR 0x42000000
/* baudrate */
#define CONFIG_BAUDRATE 115200
#define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "bootm_size=0x10000000\0"
-
#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
#define CONFIG_FAT_WRITE /* enable write access */
#define CONFIG_SYS_SPL_MALLOC_START 0x4ff00000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 /* 512 KiB */
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-
/* I2C */
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SYS_I2C
/* GPIO */
#define CONFIG_SUNXI_GPIO
+#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_CMD_GPIO
+#ifdef CONFIG_VIDEO
+/*
+ * The amount of RAM that is reserved for the FB. This will not show up as
+ * RAM to the kernel, but will be reclaimed by a KMS driver in future.
+ */
+#define CONFIG_SUNXI_FB_SIZE (8 << 20)
+
+/* Do we want to initialize a simple FB? */
+#define CONFIG_VIDEO_DT_SIMPLEFB
+
+#define CONFIG_VIDEO_SUNXI
+
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VIDEO_LOGO
+
+/* allow both serial and cfb console. */
+#define CONFIG_CONSOLE_MUX
+/* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+
+#define CONFIG_SYS_MEM_TOP_HIDE ((CONFIG_SUNXI_FB_SIZE + 0xFFF) & ~0xFFF)
+
+/* To be able to hook simplefb into dt */
+#ifdef CONFIG_VIDEO_DT_SIMPLEFB
+#define CONFIG_OF_BOARD_SETUP
+#endif
+
+#endif /* CONFIG_VIDEO */
+
/* Ethernet support */
#ifdef CONFIG_SUNXI_EMAC
#define CONFIG_MII /* MII PHY management */
#define CONFIG_USB_STORAGE
#endif
+#ifdef CONFIG_USB_KEYBOARD
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_PREBOOT
+#define CONFIG_SYS_STDIO_DEREGISTER
+#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
+#endif
+
#if !defined CONFIG_ENV_IS_IN_MMC && \
!defined CONFIG_ENV_IS_IN_NAND && \
!defined CONFIG_ENV_IS_IN_FAT && \
#endif
#define CONFIG_MISC_INIT_R
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#ifndef CONFIG_SPL_BUILD
#include <config_distro_defaults.h>
+
+/* 256M RAM (minimum), 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
+ * 1M script, 1M pxe and the ramdisk at the end */
+#define MEM_LAYOUT_ENV_SETTINGS \
+ "bootm_size=0x10000000\0" \
+ "kernel_addr_r=0x42000000\0" \
+ "fdt_addr_r=0x43000000\0" \
+ "scriptaddr=0x43100000\0" \
+ "pxefile_addr_r=0x43200000\0" \
+ "ramdisk_addr_r=0x43300000\0"
+
+#ifdef CONFIG_MMC
+#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
+#else
+#define BOOT_TARGET_DEVICES_MMC(func)
+#endif
+
+#ifdef CONFIG_AHCI
+#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
+#else
+#define BOOT_TARGET_DEVICES_SCSI(func)
+#endif
+
+#ifdef CONFIG_USB_EHCI
+#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
+#else
+#define BOOT_TARGET_DEVICES_USB(func)
+#endif
+
+#define BOOT_TARGET_DEVICES(func) \
+ BOOT_TARGET_DEVICES_MMC(func) \
+ BOOT_TARGET_DEVICES_SCSI(func) \
+ BOOT_TARGET_DEVICES_USB(func) \
+ func(PXE, pxe, na) \
+ func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+#ifdef CONFIG_USB_KEYBOARD
+#define CONSOLE_STDIN_SETTINGS \
+ "preboot=usb start\0" \
+ "stdin=serial,usbkbd\0"
+#else
+#define CONSOLE_STDIN_SETTINGS \
+ "stdin=serial\0"
+#endif
+
+#ifdef CONFIG_VIDEO
+#define CONSOLE_STDOUT_SETTINGS \
+ "stdout=serial,vga\0" \
+ "stderr=serial,vga\0"
+#else
+#define CONSOLE_STDOUT_SETTINGS \
+ "stdout=serial\0" \
+ "stderr=serial\0"
+#endif
+
+#define CONSOLE_ENV_SETTINGS \
+ CONSOLE_STDIN_SETTINGS \
+ CONSOLE_STDOUT_SETTINGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONSOLE_ENV_SETTINGS \
+ MEM_LAYOUT_ENV_SETTINGS \
+ "fdtfile=" CONFIG_FDTFILE "\0" \
+ "console=ttyS0,115200\0" \
+ BOOTENV
+
+#else /* ifndef CONFIG_SPL_BUILD */
+#define CONFIG_EXTRA_ENV_SETTINGS
#endif
#endif /* _SUNXI_COMMON_CONFIG_H */