#include <linux/sizes.h>
#include <asm/arch/stm32.h>
-#ifdef CONFIG_ARMV7_PSCI
-/* PSCI support */
-#define CONFIG_ARMV7_SECURE_BASE STM32_SYSRAM_BASE
-#define CONFIG_ARMV7_SECURE_MAX_SIZE STM32_SYSRAM_SIZE
-#endif
-
/*
* Configuration of the external SRAM memory used by U-Boot
*/
-#define CONFIG_SYS_SDRAM_BASE STM32_DDR_BASE
-#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
-
-/*
- * Console I/O buffer size
- */
-#define CONFIG_SYS_CBSIZE SZ_1K
+#define CFG_SYS_SDRAM_BASE STM32_DDR_BASE
/*
* For booting Linux, use the first 256 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CONFIG_SYS_BOOTMAPSZ SZ_256M
-
-/* Extend size of kernel image for uncompression */
-#define CONFIG_SYS_BOOTM_LEN SZ_32M
-
-/* SPL support */
-#ifdef CONFIG_SPL
-/* SPL use DDR */
-#define CONFIG_SYS_SPL_MALLOC_START 0xC0300000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x01D00000
-
-/* Restrict SPL to fit within SYSRAM */
-#define STM32_SYSRAM_END (STM32_SYSRAM_BASE + STM32_SYSRAM_SIZE)
-#define CONFIG_SPL_MAX_FOOTPRINT (STM32_SYSRAM_END - CONFIG_SPL_TEXT_BASE)
-#define CONFIG_SPL_STACK (STM32_SYSRAM_BASE + \
- STM32_SYSRAM_SIZE)
-#endif /* #ifdef CONFIG_SPL */
-/*MMC SD*/
-#define CONFIG_SYS_MMC_MAX_DEVICE 3
+#define CFG_SYS_BOOTMAPSZ SZ_256M
/* NAND support */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
/* Ethernet need */
-#ifdef CONFIG_DWC_ETH_QOS
-#define CONFIG_SERVERIP 192.168.1.1
-#define CONFIG_SYS_AUTOLOAD "no"
-#endif
+
+#define STM32MP_FIP_IMAGE_GUID \
+ EFI_GUID(0x19d5df83, 0x11b0, 0x457b, 0xbe, 0x2c, \
+ 0x75, 0x59, 0xc1, 0x31, 0x42, 0xa5)
/*****************************************************************************/
#ifdef CONFIG_DISTRO_DEFAULTS
#endif
#ifdef CONFIG_CMD_UBIFS
-#define BOOT_TARGET_UBIFS(func) func(UBIFS, ubifs, 0)
+#define BOOT_TARGET_UBIFS(func) func(UBIFS, ubifs, 0, UBI, boot)
#else
#define BOOT_TARGET_UBIFS(func)
#endif
BOOT_TARGET_PXE(func)
/*
- * default bootcmd for stm32mp1:
+ * default bootcmd for stm32mp15:
* for serial/usb: execute the stm32prog command
* for mmc boot (eMMC, SD card), distro boot on the same mmc device
* for nand or spi-nand boot, distro boot with ubifs on UBI partition
"fdtoverlay_addr_r=" __FDTOVERLAY_ADDR_R "\0" \
"ramdisk_addr_r=" __RAMDISK_ADDR_R "\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
STM32MP_MEM_LAYOUT \
STM32MP_BOOTCMD \
STM32MP_PARTS_DEFAULT \