#include <linux/sizes.h>
#include <asm/arch/stm32.h>
-/*
- * Number of clock ticks in 1 sec
- */
-#define CONFIG_SYS_HZ 1000
-
#ifndef CONFIG_STM32MP1_TRUSTED
/* PSCI support */
#define CONFIG_ARMV7_PSCI_1_0
#define CONFIG_SYS_SDRAM_BASE STM32_DDR_BASE
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
+#ifdef CONFIG_STM32MP1_OPTEE
+#define CONFIG_SYS_MEM_TOP_HIDE SZ_32M
+#endif /* CONFIG_STM32MP1_OPTEE */
+
/*
* Console I/O buffer size
*/
/* SPL support */
#ifdef CONFIG_SPL
-/* BOOTROM load address */
/* SPL use DDR */
#define CONFIG_SPL_BSS_START_ADDR 0xC0200000
#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
/*MMC SD*/
#define CONFIG_SYS_MMC_MAX_DEVICE 3
+/* NAND support */
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+
+/* Ethernet need */
+#ifdef CONFIG_DWC_ETH_QOS
+#define CONFIG_SYS_NONCACHED_MEMORY (1 * SZ_1M) /* 1M */
+#define CONFIG_SERVERIP 192.168.1.1
+#define CONFIG_BOOTP_SERVERIP
+#define CONFIG_SYS_AUTOLOAD "no"
+#endif
+
+/* Dynamic MTD partition support */
+#if defined(CONFIG_STM32_QSPI) || defined(CONFIG_NAND_STM32_FMC2)
+#define CONFIG_SYS_MTDPARTS_RUNTIME
+#endif
+
+#ifdef CONFIG_DM_VIDEO
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_BMP_16BPP
+#define CONFIG_BMP_24BPP
+#define CONFIG_BMP_32BPP
+#endif
+
/*****************************************************************************/
#ifdef CONFIG_DISTRO_DEFAULTS
/*****************************************************************************/
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
+ func(UBIFS, ubifs, 0) \
func(MMC, mmc, 0) \
- func(MMC, mmc, 2)
+ func(MMC, mmc, 2) \
+ func(PXE, pxe, na)
+
/*
* bootcmd for stm32mp1:
* for serial/usb: execute the stm32prog command
"if test ${boot_device} = serial || test ${boot_device} = usb;" \
"then stm32prog ${boot_device} ${boot_instance}; " \
"else " \
+ "run env_check;" \
"if test ${boot_device} = mmc;" \
"then env set boot_targets \"mmc${boot_instance}\"; fi;" \
"if test ${boot_device} = nand;" \
#include <config_distro_bootcmd.h>
+#ifdef CONFIG_STM32MP1_OPTEE
+/* with OPTEE: define specific MTD partitions = teeh, teed, teex */
+#define STM32MP_MTDPARTS \
+ "mtdparts_nor0=256k(fsbl1),256k(fsbl2),2m(ssbl),256k(u-boot-env),256k(teeh),256k(teed),256k(teex),-(nor_user)\0" \
+ "mtdparts_nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),512k(teeh),512k(teed),512k(teex),-(UBI)\0"
+
+#else /* CONFIG_STM32MP1_OPTEE */
+#define STM32MP_MTDPARTS \
+ "mtdparts_nor0=256k(fsbl1),256k(fsbl2),2m(ssbl),256k(u-boot-env),-(nor_user)\0" \
+ "mtdparts_nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),-(UBI)\0"
+
+#endif /* CONFIG_STM32MP1_OPTEE */
+
+#ifndef CONFIG_SYS_MTDPARTS_RUNTIME
+#undef STM32MP_MTDPARTS
+#define STM32MP_MTDPARTS
+#endif
+
/*
* memory layout for 32M uncompressed/compressed kernel,
* 1M fdt, 1M script, 1M pxe and 1M for splashimage
* and the ramdisk at the end.
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootdelay=1\0" \
"kernel_addr_r=0xc2000000\0" \
"fdt_addr_r=0xc4000000\0" \
"scriptaddr=0xc4100000\0" \
"ramdisk_addr_r=0xc4400000\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
+ "altbootcmd=run bootcmd\0" \
+ "env_default=1\0" \
+ "env_check=if test $env_default -eq 1;"\
+ " then env set env_default 0;env save;fi\0" \
STM32MP_BOOTCMD \
- BOOTENV
+ STM32MP_MTDPARTS \
+ BOOTENV \
+ "boot_net_usb_start=true\0"
#endif /* ifndef CONFIG_SPL_BUILD */
#endif /* ifdef CONFIG_DISTRO_DEFAULTS*/