Convert CONFIG_SPLASH_SCREEN et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / socrates.h

diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index c35e8ae..da60546 100644 (file)
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -19,8 +19,6 @@
 /* High Level Configuration Options */
 #define CONFIG_SOCRATES                1
 
-#define CONFIG_PCI_INDIRECT_BRIDGE
-
 /*
  * Only possible on E500 Version 2 or newer cores.
  */
@@ -53,8 +51,6 @@
 #define CONFIG_SYS_INIT_DBCR DBCR_IDM          /* Enable Debug Exceptions      */
 
 #undef CONFIG_SYS_DRAM_TEST                    /* memory test, takes time      */
-#define CONFIG_SYS_MEMTEST_START       0x00400000
-#define CONFIG_SYS_MEMTEST_END         0x00C00000
 
 #define CONFIG_SYS_CCSRBAR             0xE0000000
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
@@ -148,35 +144,7 @@
 #define CONFIG_SYS_BR2_PRELIM          0xc80018a1      /* UPMB, 32-bit */
 #define CONFIG_SYS_OR2_PRELIM          0xfc000000      /* 64 MB        */
 
-/* Serial Port */
-
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    1
-#define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
-
-#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
-
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-       {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-/*
- * I2C
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED       102124
-#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED      102124
-#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
-
-/* I2C RTC */
-#define CONFIG_SYS_I2C_RTC_ADDR        0x32    /* at address 0x32              */
-
-/* I2C W83782G HW-Monitoring IC */
-#define CONFIG_SYS_I2C_W83782G_ADDR    0x28    /* W83782G address              */
+#define CONFIG_SYS_SPD_BUS_NUM 0
 
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
 
@@ -184,7 +152,6 @@
  * General PCI
  * Memory space is mapped 1-1.
  */
-#define CONFIG_SYS_PCI_PHYS            0x80000000      /* 1G PCI TLB */
 
 /* PCI is clocked by the external source at 33 MHz */
 #define CONFIG_PCI_CLK_FREQ    33000000
@@ -195,10 +162,6 @@
 #define CONFIG_SYS_PCI1_IO_PHYS        CONFIG_SYS_PCI1_IO_BASE
 #define CONFIG_SYS_PCI1_IO_SIZE        0x01000000      /* 16M                  */
 
-#if defined(CONFIG_PCI)
-#undef CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
-#endif /* CONFIG_PCI */
-
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "TSEC0"
 #define CONFIG_TSEC3   1
@@ -222,12 +185,6 @@
 /*
  * Environment
  */
-#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K(one sector) for env     */
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - \
-                               CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE                0x4000
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
@@ -320,8 +277,6 @@
 /* USB support */
 #define CONFIG_USB_OHCI_NEW            1
 #define CONFIG_PCI_OHCI                        1
-#define CONFIG_PCI_OHCI_DEVNO          3 /* Number in PCI list */
-#define CONFIG_PCI_EHCI_DEVNO          (CONFIG_PCI_OHCI_DEVNO / 2)
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     15
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME          "ohci_pci"
 #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS        1