Convert CONFIG_SAMSUNG_ONENAND to Kconfig

[platform/kernel/u-boot.git] / include / configs / socrates.h

diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 5052c72..73f82fc 100644 (file)
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -22,7 +22,6 @@
 /*
  * Only possible on E500 Version 2 or newer cores.
  */
-#define CONFIG_ENABLE_36BIT_PHYS       1
 
 /*
  * sysclk for MPC85xx
@@ -38,15 +37,10 @@
  * in the README.mpc85xxads.
  */
 
-#ifndef CONFIG_SYS_CLK_FREQ
-#define CONFIG_SYS_CLK_FREQ    66666666
-#endif
-
 /*
  * These can be toggled for performance analysis, otherwise use default.
  */
 #define CONFIG_L2_CACHE                        /* toggle L2 cache              */
-#define CONFIG_BTB                     /* toggle branch predition      */
 
 #define CONFIG_SYS_INIT_DBCR DBCR_IDM          /* Enable Debug Exceptions      */
 
@@ -64,9 +58,6 @@
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_VERY_BIG_RAM
 
-#define CONFIG_DIMM_SLOTS_PER_CTLR     1
-#define CONFIG_CHIP_SELECTS_PER_CTRL   2
-
 /* I2C addresses of SPD EEPROMs */
 #define SPD_EEPROM_ADDRESS     0x50    /* CTLR 0 DIMM 0 */
 
@@ -97,14 +88,11 @@
 #define CONFIG_SYS_LBC_FLASH_BASE      CONFIG_SYS_FLASH1       /* Localbus flash start */
 #define CONFIG_SYS_FLASH_BASE          CONFIG_SYS_LBC_FLASH_BASE /* start of FLASH     */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS     2               /* number of banks      */
 #define CONFIG_SYS_MAX_FLASH_SECT      256             /* sectors per device   */
 #undef CONFIG_SYS_FLASH_CHECKSUM
 #define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms)     */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms)     */
 
-#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor     */
-
 #define CONFIG_SYS_LBC_LCRR            0x00030004    /* LB clock ratio reg     */
 #define CONFIG_SYS_LBC_LBCR            0x00000000    /* LB config reg          */
 #define CONFIG_SYS_LBC_LSRT            0x20000000    /* LB sdram refresh timer */
@@ -114,8 +102,7 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       0xe4010000      /* Initial RAM address  */
 #define CONFIG_SYS_INIT_RAM_SIZE       0x4000          /* Size used area in RAM*/
 
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_SP_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 #define CONFIG_SYS_MONITOR_LEN         (384 * 1024)    /* Reserve 384KiB for Mon */
 
@@ -162,10 +149,6 @@
 #define TSEC3_FLAGS            TSEC_GIGABIT
 
 /* Options are: TSEC[0,1] */
-#define CONFIG_ETHPRIME                "TSEC0"
-
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
 
 /*
  * Environment
@@ -174,13 +157,6 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 
-#define        CONFIG_TIMESTAMP                /* Print image info with ts     */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
 /*
  * Miscellaneous configurable options
  */