configs: Re-sync HUSH options

[platform/kernel/u-boot.git] / include / configs / socfpga_sockit.h

diff --git a/include/configs/socfpga_sockit.h b/include/configs/socfpga_sockit.h
index 747e988..07cfcbf 100644 (file)
--- a/include/configs/socfpga_sockit.h
+++ b/include/configs/socfpga_sockit.h
@@ -6,7 +6,7 @@
 #ifndef __CONFIG_TERASIC_SOCKIT_H__
 #define __CONFIG_TERASIC_SOCKIT_H__
 
-#include <asm/arch/socfpga_base_addrs.h>
+#include <asm/arch/base_addr_ac5.h>
 
 /* U-Boot Commands */
 #define CONFIG_SYS_NO_FLASH
@@ -23,7 +23,6 @@
 #define CONFIG_CMD_EXT4_WRITE
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_GPIO
 #define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_MMC
@@ -38,45 +37,27 @@
 #define CONFIG_BOOTDELAY       3
 #define CONFIG_BOOTFILE                "fitImage"
 #define CONFIG_BOOTARGS                "console=ttyS0," __stringify(CONFIG_BAUDRATE)
-#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
-#define CONFIG_BOOTCOMMAND     "run ramboot"
-#else
 #define CONFIG_BOOTCOMMAND     "run mmcload; run mmcboot"
-#endif
 #define CONFIG_LOADADDR                0x01000000
 #define CONFIG_SYS_LOAD_ADDR   CONFIG_LOADADDR
 
 /* Ethernet on SoC (EMAC) */
 #if defined(CONFIG_CMD_NET)
-
-/* PHY */
 #define CONFIG_PHY_MICREL
 #define CONFIG_PHY_MICREL_KSZ9021
-#define CONFIG_KSZ9021_CLK_SKEW_ENV    "micrel-ksz9021-clk-skew"
-#define CONFIG_KSZ9021_CLK_SKEW_VAL    0xf0f0
-#define CONFIG_KSZ9021_DATA_SKEW_ENV   "micrel-ksz9021-data-skew"
-#define CONFIG_KSZ9021_DATA_SKEW_VAL   0x0
-
 #endif
 
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_DWC2_REG_ADDR       SOCFPGA_USB1_ADDRESS
-#endif
-#define CONFIG_G_DNL_MANUFACTURER      "Terasic"
+#define CONFIG_ENV_IS_IN_MMC
 
 /* Extra Environment */
-#define CONFIG_HOSTNAME                socfpga_sockit
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "verify=n\0" \
-       "loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+       "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
        "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
                "bootm ${loadaddr} - ${fdt_addr}\0" \
        "bootimage=zImage\0" \
        "fdt_addr=100\0" \
        "fdtimage=socfpga.dtb\0" \
-               "fsloadcmd=ext2load\0" \
        "bootm ${loadaddr} - ${fdt_addr}\0" \
        "mmcroot=/dev/mmcblk0p2\0" \
        "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
@@ -85,6 +66,13 @@
        "mmcload=mmc rescan;" \
                "load mmc 0:1 ${loadaddr} ${bootimage};" \
                "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
+       "qspiload=sf probe && mtdparts default && run ubiload\0" \
+       "qspiboot=setenv bootargs " CONFIG_BOOTARGS \
+               " ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\
+               "bootz ${loadaddr} - ${fdt_addr}\0" \
+       "ubiload=ubi part UBI && ubifsmount ubi0 && " \
+               "ubifsload ${loadaddr} /boot/${bootimage} && " \
+               "ubifsload ${fdt_addr} /boot/${fdtimage}\0"
 
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>