*
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__
-#define __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__
+#ifndef __CONFIG_SOCFPGA_COMMON_H__
+#define __CONFIG_SOCFPGA_COMMON_H__
-#define CONFIG_SYS_GENERIC_BOARD
/* Virtual target or real hardware */
#undef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_SYS_THUMB_BUILD
-#define CONFIG_SOCFPGA
-
/*
* High level configuration
*/
#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+#define CONFIG_ARCH_MISC_INIT
#define CONFIG_ARCH_EARLY_INIT_R
#define CONFIG_SYS_NO_FLASH
#define CONFIG_CLOCKS
-#define CONFIG_FIT
-#define CONFIG_OF_LIBFDT
+#define CONFIG_CRC32_VERIFY
+
#define CONFIG_SYS_BOOTMAPSZ (64 * 1024 * 1024)
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+/* add target to build it automatically upon "make" */
+#define CONFIG_BUILD_TARGET "u-boot-with-spl.sfp"
+
/*
* Memory configurations
*/
#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE
#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000
-#define CONFIG_SYS_INIT_RAM_SIZE (0x10000 - 0x100)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_CMDLINE_EDITING /* Command history etc */
#define CONFIG_SYS_HUSH_PARSER
+#ifndef CONFIG_SYS_HOSTNAME
+#define CONFIG_SYS_HOSTNAME CONFIG_SYS_BOARD
+#endif
+
/*
* Cache
*/
-#define CONFIG_SYS_ARM_CACHE_WRITEALLOC
#define CONFIG_SYS_CACHELINE_SIZE 32
#define CONFIG_SYS_L2_PL310
#define CONFIG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS
/*
+ * SDRAM controller
+ */
+#define CONFIG_ALTERA_SDRAM
+
+/*
* EPCS/EPCQx1 Serial Flash Controller
*/
#ifdef CONFIG_ALTERA_SPI
#define CONFIG_CMD_SPI
#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_SPEED 30000000
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_SPI_FLASH_BAR
/*
* The base address is configurable in QSys, each board must specify the
* Ethernet on SoC (EMAC)
*/
#if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
-#define CONFIG_DESIGNWARE_ETH
-#define CONFIG_NET_MULTI
#define CONFIG_DW_ALTDESCRIPTOR
#define CONFIG_MII
#define CONFIG_AUTONEG_TIMEOUT (15 * CONFIG_SYS_HZ)
-#define CONFIG_PHYLIB
#define CONFIG_PHY_GIGE
#endif
#define CONFIG_DESIGNWARE_WATCHDOG
#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS
#define CONFIG_DW_WDT_CLOCK_KHZ 25000
-#define CONFIG_HW_WATCHDOG_TIMEOUT_MS 12000
+#define CONFIG_HW_WATCHDOG_TIMEOUT_MS 30000
#endif
/*
#define CONFIG_DWMMC
#define CONFIG_SOCFPGA_DWMMC
#define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH 1024
-#define CONFIG_SOCFPGA_DWMMC_DRVSEL 3
-#define CONFIG_SOCFPGA_DWMMC_SMPSEL 0
/* FIXME */
/* using smaller max blk cnt to avoid flooding the limited stack we have */
#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 /* FIXME -- SPL only? */
#endif
- /*
+/*
+ * NAND Support
+ */
+#ifdef CONFIG_NAND_DENALI
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_MAX_CHIPS 1
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_NAND_DENALI_ECC_SIZE 512
+#define CONFIG_SYS_NAND_REGS_BASE SOCFPGA_NANDREGS_ADDRESS
+#define CONFIG_SYS_NAND_DATA_BASE SOCFPGA_NANDDATA_ADDRESS
+#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10)
+#endif
+
+/*
* I2C support
*/
#define CONFIG_SYS_I2C
#define CONFIG_CMD_I2C
/*
+ * QSPI support
+ */
+/* Enable multiple SPI NOR flash manufacturers */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SPI_FLASH_MTD
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT "nor0=ff705000.spi.0"
+#endif
+/* QSPI reference clock */
+#ifndef __ASSEMBLY__
+unsigned int cm_get_qspi_controller_clk_hz(void);
+#define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz()
+#endif
+#define CONFIG_CQSPI_DECODER 0
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_BAR
+
+/*
+ * Designware SPI support
+ */
+#define CONFIG_CMD_SPI
+
+/*
* Serial Driver
*/
-#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_COM1 SOCFPGA_UART0_ADDRESS
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2
#define CONFIG_USB_STORAGE
-/*
- * NOTE: User must define either of the following to select which
- * of the two USB controllers available on SoCFPGA to use.
- * The DWC2 driver doesn't support multiple USB controllers.
- * #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB0_ADDRESS
- * #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS
- */
#endif
/*
*/
#if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_DWC2_OTG
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_VBUS_DRAW 2
/* USB Composite download gadget - g_dnl */
-#define CONFIG_USBDOWNLOAD_GADGET
-#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_DFU_FUNCTION
+#define CONFIG_USB_FUNCTION_DFU
+#ifdef CONFIG_DM_MMC
#define CONFIG_DFU_MMC
+#endif
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (32 * 1024 * 1024)
#define DFU_DEFAULT_POLL_TIMEOUT 300
#define CONFIG_G_DNL_UMS_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
#define CONFIG_G_DNL_UMS_PRODUCT_NUM CONFIG_G_DNL_PRODUCT_NUM
#ifndef CONFIG_G_DNL_MANUFACTURER
-#define CONFIG_G_DNL_MANUFACTURER "Altera"
+#define CONFIG_G_DNL_MANUFACTURER CONFIG_SYS_VENDOR
#endif
#endif
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
-#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_SIZE 4096
+/* Environment for SDMMC boot */
+#if defined(CONFIG_ENV_IS_IN_MMC) && !defined(CONFIG_ENV_OFFSET)
+#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */
+#define CONFIG_ENV_OFFSET 512 /* just after the MBR */
+#endif
+
+/* Environment for QSPI boot */
+#if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_OFFSET 0x00100000
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
+#endif
+
+/*
+ * mtd partitioning for serial NOR flash
+ *
+ * device nor0 <ff705000.spi.0>, # parts = 6
+ * #: name size offset mask_flags
+ * 0: u-boot 0x00100000 0x00000000 0
+ * 1: env1 0x00040000 0x00100000 0
+ * 2: env2 0x00040000 0x00140000 0
+ * 3: UBI 0x03e80000 0x00180000 0
+ * 4: boot 0x00e80000 0x00180000 0
+ * 5: rootfs 0x01000000 0x01000000 0
+ *
+ */
+#if defined(CONFIG_CMD_SF) && !defined(MTDPARTS_DEFAULT)
+#define MTDPARTS_DEFAULT "mtdparts=ff705000.spi.0:"\
+ "1m(u-boot)," \
+ "256k(env1)," \
+ "256k(env2)," \
+ "14848k(boot)," \
+ "16m(rootfs)," \
+ "-@1536k(UBI)\0"
+#endif
+
+/* UBI and UBIFS support */
+#if defined(CONFIG_CMD_SF) || defined(CONFIG_CMD_NAND)
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#endif
+
/*
* SPL
*
* 0xFFFF_FF00 ...... End of SRAM
*/
#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_RAM_DEVICE
#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR
-#define CONFIG_SYS_SPL_MALLOC_START CONFIG_SYS_INIT_SP_ADDR
-#define CONFIG_SYS_SPL_MALLOC_SIZE (5 * 1024)
-
-#define CHUNKSZ_CRC32 (1 * 1024) /* FIXME: ewww */
-#define CONFIG_CRC32_VERIFY
-
-/* Linker script for SPL */
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/socfpga/u-boot-spl.lds"
+#define CONFIG_SPL_MAX_SIZE (64 * 1024)
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MALLOC_SIMPLE
+#endif
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
+#ifdef CONFIG_DM_MMC
+#define CONFIG_SPL_MMC_SUPPORT
+#endif
+#ifdef CONFIG_DM_SPI
+#define CONFIG_SPL_SPI_SUPPORT
+#endif
+#ifdef CONFIG_SPL_NAND_DENALI
+#define CONFIG_SPL_NAND_SUPPORT
+#endif
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_PARTITIONS
+/* SPL SDMMC boot support */
+#ifdef CONFIG_SPL_MMC_SUPPORT
+#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 2
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#else
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 3
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xa00 /* offset 2560 sect (1M+256k) */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */
+#endif
#endif
-#endif /* __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ */
+/* SPL QSPI boot support */
+#ifdef CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
+#endif
+
+/* SPL NAND boot support */
+#ifdef CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
+#endif
+
+/*
+ * Stack setup
+ */
+#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
+
+#endif /* __CONFIG_SOCFPGA_COMMON_H__ */