MIPS: convert CONFIG_SYS_MIPS_TIMER_FREQ to Kconfig

[platform/kernel/u-boot.git] / include / configs / socfpga_arria5_secu1.h

diff --git a/include/configs/socfpga_arria5_secu1.h b/include/configs/socfpga_arria5_secu1.h
index b059100..261ae56 100644 (file)
--- a/include/configs/socfpga_arria5_secu1.h
+++ b/include/configs/socfpga_arria5_secu1.h
@@ -1,17 +1,14 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright (C) 2017-2020 ABB
+ * Copyright (C) 2017-2020 Hitachi Power Grids
  *
  */
 #ifndef __CONFIG_SOCFPGA_SECU1_H__
 #define __CONFIG_SOCFPGA_SECU1_H__
 
 #include <asm/arch/base_addr_ac5.h>
+#include <linux/stringify.h>
 
-/* Call misc_init_r */
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_HUSH_INIT_VAR
 /* Eternal oscillator */
 #define CONFIG_SYS_TIMER_RATE  40000000
 
@@ -26,44 +23,7 @@
  */
 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 
-/* Booting Linux */
-#define CONFIG_BOOTDELAY       2
-#define CONFIG_BOOTFILE                "zImage"
-#define CONFIG_BOOTARGS                \
-       "console=ttyS0," __stringify(CONFIG_BAUDRATE) \
-       " ubi.fm_autoconvert=1" \
-       " uio_pdrv_genirq.of_id=\"idq,regbank\""
-
-#define CONFIG_BOOTCOMMAND     \
-       "setenv bootcmd '"      \
-               "bridge enable; "       \
-               "if test ${bootnum} = \"b\"; " \
-                     "then run _fpga_loadsafe; " \
-               "else if test ${bootcount} -eq 4; then echo \"Switching copy...\"; setexpr x $bootnum % 2 && setexpr bootnum $x + 1; saveenv; fi; " \
-                     "run _fpga_loaduser; " \
-               "fi;" \
-               "echo \"Booting bank $bootnum\" && run userload && run userboot;" \
-       "' && " \
-       "setenv altbootcmd 'setenv bootnum b && saveenv && boot;' && " \
-       "saveenv && saveenv && boot;"
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SYS_BOOTM_LEN           (64 << 20)
-
 /* Environment settings */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Autoboot
- *
- * After 45s of inactivity in the prompt, the board will reset.
- * Set 'bootretry' in the environment to -1 to disable this behavior
- */
-#define CONFIG_BOOT_RETRY_TIME 45
-#define CONFIG_RESET_TO_RETRY
-
-#define CONFIG_LOADADDR                0x01000000
-#define CONFIG_SYS_LOAD_ADDR   CONFIG_KM_KERNEL_ADDR
 
 /*
  * FPGA Remote Update related environment
@@ -104,8 +64,6 @@
        "fdt_addr=" __stringify(CONFIG_KM_FDT_ADDR) "\0" \
        "load=tftpboot ${loadaddr} u-boot-with-nand-spl.sfp\0" \
        "loadaddr=" __stringify(CONFIG_KM_KERNEL_ADDR) "\0" \
-       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        "update=nand erase 0x0 0x00100000 && nand write ${loadaddr} 0x0 ${filesize}\0" \
        "userload=ubi part nand.ubi &&" \
                "ubi check rootfs$bootnum &&" \
@@ -120,12 +78,4 @@
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>
 
-#ifdef CONFIG_SPL_NAND_SUPPORT
-#undef CONFIG_SYS_NAND_U_BOOT_OFFS
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
-#endif
-
-#undef CONFIG_WATCHDOG_TIMEOUT_MSECS
-#define CONFIG_WATCHDOG_TIMEOUT_MSECS  60000
-
 #endif /* __CONFIG_SOCFPGA_SECU1_H__ */