global: Migrate CONFIG_STACKBASE to CFG

[platform/kernel/u-boot.git] / include / configs / snapper9g45.h

diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h
index dac2e65..df8ed45 100644 (file)
--- a/include/configs/snapper9g45.h
+++ b/include/configs/snapper9g45.h
@@ -15,70 +15,33 @@
 #include <linux/sizes.h>
 
 /* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
-#define CONFIG_SYS_AT91_SLOW_CLOCK     32768
+#define CFG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
+#define CFG_SYS_AT91_SLOW_CLOCK        32768
 
 /* CPU */
-#define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs      */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
 
 /* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE          ATMEL_BASE_CS6
-#define CONFIG_SYS_SDRAM_SIZE          (128 * 1024 * 1024) /* 64MB */
-#define CONFIG_SYS_INIT_SP_ADDR                (ATMEL_BASE_SRAM + 0x1000 - \
-                                        GENERATED_GBL_DATA_SIZE)
+#define CFG_SYS_SDRAM_BASE             ATMEL_BASE_CS6
+#define CFG_SYS_SDRAM_SIZE             (128 * 1024 * 1024) /* 64MB */
+#define CFG_SYS_INIT_RAM_SIZE  0x1000
+#define CFG_SYS_INIT_RAM_ADDR  ATMEL_BASE_SRAM
 
 /* Mem test settings */
-#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_SDRAM_BASE + (1024 * 1024))
 
 /* NAND Flash */
-#define CONFIG_SYS_NAND_ECC_BASE       ATMEL_BASE_ECC
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_BASE           ATMEL_BASE_CS3
-#define CONFIG_SYS_NAND_DBW_8
-#define CONFIG_SYS_NAND_MASK_ALE       (1 << 21) /* AD21 */
-#define CONFIG_SYS_NAND_MASK_CLE       (1 << 22) /* AD22 */
-#define CONFIG_SYS_NAND_ENABLE_PIN     AT91_PIN_PC14
-#define CONFIG_SYS_NAND_READY_PIN      AT91_PIN_PC8
-
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT         20
-#define CONFIG_RESET_PHY_R
-#define CONFIG_AT91_WANTS_COMMON_PHY
-#define CONFIG_TFTP_PORT
-#define CONFIG_TFTP_TSIZE
-
-/* MMC */
-#define CONFIG_GENERIC_ATMEL_MCI
-
-/* LCD */
-#define CONFIG_ATMEL_LCD
-#define CONFIG_GURNARD_SPLASH
-
-/* GPIOs and IO expander */
-#define CONFIG_ATMEL_LEGACY
-#define CONFIG_AT91_GPIO
-#define CONFIG_AT91_GPIO_PULLUP                1
+#define CFG_SYS_NAND_BASE              ATMEL_BASE_CS3
+#define CFG_SYS_NAND_MASK_ALE  (1 << 21) /* AD21 */
+#define CFG_SYS_NAND_MASK_CLE  (1 << 22) /* AD22 */
+#define CFG_SYS_NAND_ENABLE_PIN        AT91_PIN_PC14
+#define CFG_SYS_NAND_READY_PIN AT91_PIN_PC8
 
 /* UARTs/Serial console */
-#define CONFIG_ATMEL_USART
 
 /* Boot options */
-#define CONFIG_SYS_LOAD_ADDR           0x23000000
-
-#define CONFIG_BOOTP_BOOTFILESIZE
 
 /* Environment settings */
-#define CONFIG_ENV_OFFSET              (512 << 10)
-#define CONFIG_ENV_SIZE                        (256 << 10)
-#define CONFIG_ENV_OVERWRITE
 
-#define        CONFIG_EXTRA_ENV_SETTINGS       \
+#define        CFG_EXTRA_ENV_SETTINGS  \
        "ethaddr=00:00:00:00:00:00\0" \
        "serial=0\0" \
        "stdout=serial_atmel\0" \
@@ -100,12 +63,4 @@
 
 /* Console settings */
 
-/* U-Boot memory settings */
-#define CONFIG_SYS_MALLOC_LEN          (1 << 20)
-
-/* Command line configuration */
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_CACHE
-
 #endif /* __CONFIG_H */