Convert CONFIG_ATMEL_USART to Kconfig

[platform/kernel/u-boot.git] / include / configs / snapper9260.h

diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index a708c68..cbef618 100644 (file)
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -1,11 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Bluewater Systems Snapper 9260 and 9G20 modules
  *
  * (C) Copyright 2011 Bluewater Systems
  *   Author: Andre Renaud <andre@bluewatersys.com>
  *   Author: Ryan Mallon <ryan@bluewatersys.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -15,35 +14,26 @@
 #include <asm/hardware.h>
 #include <linux/sizes.h>
 
-#define CONFIG_SYS_TEXT_BASE           0x21f00000
-
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK     18432000 /* External Crystal, in Hz */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768
 
 /* CPU */
-#define CONFIG_ARCH_CPU_INIT
 
 #define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs      */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_DISPLAY_CPUINFO
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE          ATMEL_BASE_CS1
 #define CONFIG_SYS_SDRAM_SIZE          (64 * 1024 * 1024) /* 64MB */
 #define CONFIG_SYS_INIT_SP_ADDR                (ATMEL_BASE_SRAM1 + 0x1000 - \
                                         GENERATED_GBL_DATA_SIZE)
 
 /* Mem test settings */
-#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_SDRAM_BASE + (1024 * 1024))
 
 /* NAND Flash */
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8
@@ -65,28 +55,23 @@
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE  ATMEL_UHP_BASE
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME  "at91sam9260"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
-#define CONFIG_USB_STORAGE
 
 /* GPIOs and IO expander */
 #define CONFIG_ATMEL_LEGACY
-#define CONFIG_AT91_GPIO
 #define CONFIG_AT91_GPIO_PULLUP                1
 #define CONFIG_PCA953X
 #define CONFIG_SYS_I2C_PCA953X_ADDR    0x28
 #define CONFIG_SYS_I2C_PCA953X_WIDTH   { {0x28, 16} }
 
 /* UARTs/Serial console */
-#define CONFIG_ATMEL_USART
 #ifndef CONFIG_DM_SERIAL
 #define CONFIG_USART_BASE              ATMEL_BASE_DBGU
 #define CONFIG_USART_ID                        ATMEL_ID_SYS
 #endif
-#define CONFIG_BAUDRATE                        115200
 
 /* I2C - Bit-bashed */
 #define CONFIG_SYS_I2C
@@ -117,43 +102,15 @@
 
 /* Boot options */
 #define CONFIG_SYS_LOAD_ADDR           0x23000000
-#define CONFIG_BOOTDELAY               3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
 
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /* Environment settings */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET              (512 << 10)
-#define CONFIG_ENV_SIZE                        (256 << 10)
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BOOTARGS                        "console=ttyS0,115200 ip=any"
 
 /* Console settings */
-#define CONFIG_SYS_CBSIZE              256
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE +            \
-                                        sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 
 /* U-Boot memory settings */
 #define CONFIG_SYS_MALLOC_LEN          (1 << 20)
 
-/* Command line configuration */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
-
 #endif /* __CONFIG_H */