usb: Remove some unused CONFIG settings

[platform/kernel/u-boot.git] / include / configs / snapper9260.h

diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 7c2c5fb..7adb349 100644 (file)
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -19,22 +19,14 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768
 
 /* CPU */
-#define CONFIG_ARCH_CPU_INIT
-
-#define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs      */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
 
 /* SDRAM */
 #define CONFIG_SYS_SDRAM_BASE          ATMEL_BASE_CS1
 #define CONFIG_SYS_SDRAM_SIZE          (64 * 1024 * 1024) /* 64MB */
-#define CONFIG_SYS_INIT_SP_ADDR                (ATMEL_BASE_SRAM1 + 0x1000 - \
-                                        GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR       ATMEL_BASE_SRAM1
 
 /* Mem test settings */
-#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_SDRAM_BASE + (1024 * 1024))
 
 /* NAND Flash */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
@@ -45,44 +37,18 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN     AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN      AT91_PIN_PC13
 
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT         20
-#define CONFIG_RESET_PHY_R
-#define CONFIG_AT91_WANTS_COMMON_PHY
-#define CONFIG_TFTP_PORT
-#define CONFIG_TFTP_TSIZE
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE  ATMEL_UHP_BASE
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME  "at91sam9260"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
-
 /* GPIOs and IO expander */
-#define CONFIG_ATMEL_LEGACY
-#define CONFIG_AT91_GPIO
-#define CONFIG_AT91_GPIO_PULLUP                1
 #define CONFIG_PCA953X
 #define CONFIG_SYS_I2C_PCA953X_ADDR    0x28
 #define CONFIG_SYS_I2C_PCA953X_WIDTH   { {0x28, 16} }
 
 /* UARTs/Serial console */
-#define CONFIG_ATMEL_USART
 #ifndef CONFIG_DM_SERIAL
 #define CONFIG_USART_BASE              ATMEL_BASE_DBGU
 #define CONFIG_USART_ID                        ATMEL_ID_SYS
 #endif
 
 /* I2C - Bit-bashed */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT            /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED      100000
-#define CONFIG_SYS_I2C_SOFT_SLAVE      0x7F
 #define CONFIG_SOFT_I2C_READ_REPEATED_START
 #define I2C_INIT do {                                                  \
                at91_set_gpio_output(AT91_PIN_PA23, 1);                 \
@@ -106,16 +72,9 @@
 #define I2C_DELAY      udelay(2)
 
 /* Boot options */
-#define CONFIG_SYS_LOAD_ADDR           0x23000000
-
-#define CONFIG_BOOTP_BOOTFILESIZE
 
 /* Environment settings */
-#define CONFIG_ENV_OVERWRITE
 
 /* Console settings */
 
-/* U-Boot memory settings */
-#define CONFIG_SYS_MALLOC_LEN          (1 << 20)
-
 #endif /* __CONFIG_H */