configs: Re-sync HUSH options

[platform/kernel/u-boot.git] / include / configs / snapper9260.h

diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 383d1ce..3674e91 100644 (file)
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -13,14 +13,13 @@
 
 /* SoC type is defined in boards.cfg */
 #include <asm/hardware.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 
-#define CONFIG_SYS_TEXT_BASE           0x20000000
+#define CONFIG_SYS_TEXT_BASE           0x21f00000
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK     18432000 /* External Crystal, in Hz */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768
-#define CONFIG_SYS_HZ                  1000
 
 /* CPU */
 #define CONFIG_ARCH_CPU_INIT
@@ -29,9 +28,7 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 #define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_FIT
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS           1
@@ -60,11 +57,13 @@
 #define CONFIG_RMII
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_RESET_PHY_R
+#define CONFIG_AT91_WANTS_COMMON_PHY
 #define CONFIG_TFTP_PORT
 #define CONFIG_TFTP_TSIZE
 
 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
@@ -74,7 +73,6 @@
 #define CONFIG_USB_STORAGE
 
 /* GPIOs and IO expander */
-#define CONFIG_AT91_LEGACY
 #define CONFIG_ATMEL_LEGACY
 #define CONFIG_AT91_GPIO
 #define CONFIG_AT91_GPIO_PULLUP                1
@@ -84,17 +82,18 @@
 
 /* UARTs/Serial console */
 #define CONFIG_ATMEL_USART
+#ifndef CONFIG_DM_SERIAL
 #define CONFIG_USART_BASE              ATMEL_BASE_DBGU
 #define CONFIG_USART_ID                        ATMEL_ID_SYS
+#endif
 #define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_PROMPT              "Snapper> "
 
 /* I2C - Bit-bashed */
-#define CONFIG_SOFT_I2C
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_I2C_SLAVE           0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT            /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED      100000
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0x7F
 #define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define CONFIG_I2C_MULTI_BUS
 #define I2C_INIT do {                                                  \
                at91_set_gpio_output(AT91_PIN_PA23, 1);                 \
                at91_set_gpio_output(AT91_PIN_PA24, 1);                 \
@@ -141,25 +140,15 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 
 /* U-Boot memory settings */
 #define CONFIG_SYS_MALLOC_LEN          (1 << 20)
 
 /* Command line configuration */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_I2C
-#undef CONFIG_CMD_GPIO
 #define CONFIG_CMD_USB
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND