video: Moving mx3fb.c to CONFIG_VIDEO

[platform/kernel/u-boot.git] / include / configs / smdkc100.h

diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index a8ba052..6663629 100644 (file)
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -32,9 +32,8 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_ARMCORTEXA8     1       /* This is an ARM V7 CPU core */
 #define CONFIG_SAMSUNG         1       /* in a SAMSUNG core */
-#define CONFIG_S5PC1XX         1       /* which is in a S5PC1XX Family */
+#define CONFIG_S5P             1       /* which is in a S5P Family */
 #define CONFIG_S5PC100         1       /* which is in a S5PC100 */
 #define CONFIG_SMDKC100                1       /* working with SMDKC100 */
 
@@ -45,8 +44,6 @@
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-
 /* input clock of PLL: SMDKC100 has 12MHz input clock */
 #define CONFIG_SYS_CLK_FREQ            12000000
 
@@ -63,14 +60,15 @@
  * 1MB = 0x100000, 0x100000 = 1024 * 1024
  */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (1 << 20))
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes for */
-                                               /* initial data */
 /*
  * select serial console configuration
  */
 #define CONFIG_SERIAL0                 1       /* use SERIAL 0 on SMDKC100 */
 #define CONFIG_SERIAL_MULTI            1
 
+/* PWM */
+#define CONFIG_PWM                     1
+
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_BAUDRATE                        115200
@@ -83,7 +81,6 @@
 #undef CONFIG_CMD_FLASH
 #undef CONFIG_CMD_IMLS
 #undef CONFIG_CMD_NAND
-#undef CONFIG_CMD_NET
 
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_REGINFO
@@ -211,7 +208,7 @@
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* 256 KiB */
 #define CONFIG_IDENT_STRING            " for SMDKC100"
 
-#if !defined(CONFIG_NAND_SPL) && (TEXT_BASE >= 0xc0000000)
+#if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000)
 #define CONFIG_ENABLE_MMU
 #endif
 
@@ -235,4 +232,16 @@
 
 #define CONFIG_DOS_PARTITION           1
 
+#define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
+/*
+ * Ethernet Contoller driver
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_SMC911X         1       /* we have a SMC9115 on-board   */
+#define CONFIG_SMC911X_16_BIT  1       /* SMC911X_16_BIT Mode          */
+#define CONFIG_SMC911X_BASE    0x98800300      /* SMC911X Drive Base   */
+#define CONFIG_ENV_SROM_BANK   3       /* Select SROM Bank-3 for Ethernet*/
+#endif /* CONFIG_CMD_NET */
+
 #endif /* __CONFIG_H */