imx: wandboard: convert FEC support to DM_ETH

[platform/kernel/u-boot.git] / include / configs / smartweb.h

diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index 49c838b..c1a43a5 100644 (file)
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
@@ -16,8 +17,6 @@
  * DENX Software Engineering GmbH
  *
  * Configuation settings for the smartweb.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -35,7 +34,6 @@
  * program. Since the linker has to swallow that define, we must use a pure
  * hex number here!
  */
-#define CONFIG_SYS_TEXT_BASE           0x23000000
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768           /* slow clock xtal */
@@ -52,9 +50,7 @@
 
 /* setting board specific options */
 #define CONFIG_MACH_TYPE               MACH_TYPE_SMARTWEB
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_ENV_OVERWRITE    1 /* Overwrite ethaddr / serial# */
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_AUTOLOAD "yes"
 #define CONFIG_RESET_TO_RETRY
 
@@ -66,7 +62,6 @@
  * SDRAM: 1 bank, 64 MB, base address 0x20000000
  * Already initialized before u-boot gets started.
  */
-#define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE          ATMEL_BASE_CS1
 #define CONFIG_SYS_SDRAM_SIZE          (64 * SZ_1M)
 
@@ -82,7 +77,6 @@
        ROUND(3 * CONFIG_ENV_SIZE + (4 * SZ_1M), 0x1000)
 
 /* NAND flash settings */
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8
@@ -91,8 +85,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN     AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN      AT91_PIN_PC13
 
-#define CONFIG_MTD_DEVICE
-
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
 #define CONFIG_AT91_GPIO               /* enable the GPIO features */
@@ -114,22 +106,12 @@
 
 /* BOOTP and DHCP options */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_NFSBOOTCOMMAND                                          \
        "setenv autoload yes; setenv autoboot yes; "                    \
        "setenv bootargs ${basicargs} ${mtdparts} "                     \
        "root=/dev/nfs ip=dhcp nfsroot=${serverip}:/srv/nfs/rootfs; "   \
        "dhcp"
 
-/* Enable the watchdog */
-#define CONFIG_AT91SAM9_WATCHDOG
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_HW_WATCHDOG
-#endif
-#define CONFIG_AT91_HW_WDT_TIMEOUT     15
-
 #if !defined(CONFIG_SPL_BUILD)
 /* USB configuration */
 #define CONFIG_USB_ATMEL
@@ -141,8 +123,6 @@
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
 
 /* USB DFU support */
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
 
 #define CONFIG_USB_GADGET_AT91
 
@@ -154,8 +134,6 @@
 /* General Boot Parameter */
 #define CONFIG_BOOTCOMMAND             "run flashboot"
 #define CONFIG_SYS_CBSIZE              512
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
 
 /*
  * RAM Memory address where to put the
@@ -166,10 +144,8 @@
 /*
  * The NAND Flash partitions:
  */
-#define CONFIG_ENV_OFFSET              (0x100000)
 #define CONFIG_ENV_OFFSET_REDUND       (0x180000)
 #define CONFIG_ENV_RANGE               (SZ_512K)
-#define CONFIG_ENV_SIZE                        (SZ_128K)
 
 /*
  * Predefined environment variables.
@@ -196,8 +172,6 @@
 #endif
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE           0x0
 #define CONFIG_SPL_MAX_SIZE            (SZ_4K)
 
 #define CONFIG_SPL_BSS_START_ADDR      CONFIG_SYS_SDRAM_BASE
@@ -240,8 +214,7 @@
 #define CONFIG_SYS_MCKR_CSS            (0x02 | CONFIG_SYS_MCKR)
 #define CONFIG_SYS_AT91_PLLB           0x10483f0e
 
-#if defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
-#endif
+#define CONFIG_SPL_PAD_TO              CONFIG_SYS_NAND_U_BOOT_OFFS
+#define CONFIG_SYS_SPL_LEN             CONFIG_SPL_PAD_TO
+
 #endif /* __CONFIG_H */