configs: Re-sync HUSH options

[platform/kernel/u-boot.git] / include / configs / smartweb.h

diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index e5aec33..b1760cc 100644 (file)
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -28,6 +28,7 @@
  * In this case SoC is defined in boards.cfg.
  */
 #include <asm/hardware.h>
+#include <linux/sizes.h>
 
 /*
  * Warning: changing CONFIG_SYS_TEXT_BASE requires adapting the initial boot
@@ -48,11 +49,16 @@
 #define CONFIG_BOARD_EARLY_INIT_F      /* call board_early_init_f() */
 #define CONFIG_DISPLAY_CPUINFO         /* display CPU Info at startup */
 
+/* We set the max number of command args high to avoid HUSH bugs. */
+#define CONFIG_SYS_MAXARGS    32
+
 /* setting board specific options */
-# define CONFIG_MACH_TYPE              MACH_TYPE_SMARTWEB
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_CMDLINE_EDITING
+#define CONFIG_MACH_TYPE               MACH_TYPE_SMARTWEB
 #define CONFIG_AUTO_COMPLETE
+#define CONFIG_ENV_OVERWRITE    1 /* Overwrite ethaddr / serial# */
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_AUTOLOAD "yes"
+#define CONFIG_RESET_TO_RETRY
 
 /* The LED PINs */
 #define CONFIG_RED_LED                 AT91_PIN_PA9
@@ -64,7 +70,7 @@
  */
 #define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE          ATMEL_BASE_CS1
-#define CONFIG_SYS_SDRAM_SIZE          (64 << 20)
+#define CONFIG_SYS_SDRAM_SIZE          (64 * SZ_1M)
 
 /*
  * Perform a SDRAM Memtest from the start of SDRAM
@@ -75,7 +81,7 @@
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN \
-       ROUND(3 * CONFIG_ENV_SIZE + (128 << 10), 0x1000)
+       ROUND(3 * CONFIG_ENV_SIZE + (4 * SZ_1M), 0x1000)
 
 /* NAND flash settings */
 #define CONFIG_NAND_ATMEL
@@ -116,6 +122,9 @@
  *
  */
 #define CONFIG_MACB
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_MCS7830
 #define CONFIG_RMII                    /* use reduced MII inteface */
 #define CONFIG_NET_RETRY_COUNT 20      /* # of DHCP/BOOTP retries */
 #define CONFIG_AT91_WANTS_COMMON_PHY
@@ -140,23 +149,40 @@
 
 #if !defined(CONFIG_SPL_BUILD)
 /* USB configuration */
+#define CONFIG_CMD_USB
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE  ATMEL_UHP_BASE
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME  "at91sam9260"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
+
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_MCS7830
+
+/* USB DFU support */
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+#define CONFIG_USB_GADGET_AT91
+
+/* DFU class support */
+#define CONFIG_CMD_DFU
+#define CONFIG_USB_FUNCTION_DFU
+#define CONFIG_DFU_NAND
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE   SZ_1M
+#define DFU_MANIFEST_POLL_TIMEOUT      25000
+
+#define CONFIG_SYS_CACHELINE_SIZE      0x2000
 #endif
 
 /* General Boot Parameter */
 #define CONFIG_BOOTDELAY               3
 #define CONFIG_BOOTCOMMAND             "run flashboot"
-#define CONFIG_SYS_PROMPT              "U-Boot> "
 #define CONFIG_SYS_CBSIZE              512
-#define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_PBSIZE \
        (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP
@@ -174,8 +200,8 @@
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET              (0x100000)
 #define CONFIG_ENV_OFFSET_REDUND       (0x180000)
-#define CONFIG_ENV_RANGE               (0x80000)
-#define CONFIG_ENV_SIZE                        (0x20000)
+#define CONFIG_ENV_RANGE               (SZ_512K)
+#define CONFIG_ENV_SIZE                        (SZ_128K)
 
 /*
  * Predefined environment variables.
@@ -194,7 +220,6 @@
 #undef CONFIG_CMD_LOADS
 
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_USB
 #define CONFIG_CMD_FAT
 
 #ifdef CONFIG_MACB
@@ -206,13 +231,6 @@
 # undef CONFIG_CMD_NFS
 #endif /* CONFIG_MACB */
 
-#if !defined(CONFIG_SPL_BUILD)
-/* Enable Device-Tree (FDT) support */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_FDT
-#define CONFIG_FIT
-#endif
-
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_INIT_SP_ADDR                0x301000
 #define CONFIG_SPL_STACK_R
@@ -231,10 +249,10 @@
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE           0x0
-#define CONFIG_SPL_MAX_SIZE            (4 * 1024)
+#define CONFIG_SPL_MAX_SIZE            (SZ_4K)
 
 #define CONFIG_SPL_BSS_START_ADDR      CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SPL_BSS_MAX_SIZE                (16 * 1024)
+#define CONFIG_SPL_BSS_MAX_SIZE                (SZ_16K)
 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
                                        CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
@@ -254,14 +272,14 @@
 #define CONFIG_SPL_NAND_RAW_ONLY
 #define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x20000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE    0x80000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    SZ_512K
 #define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
-#define CONFIG_SYS_NAND_SIZE           (256*1024*1024)
-#define CONFIG_SYS_NAND_PAGE_SIZE      2048
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
+#define CONFIG_SYS_NAND_SIZE           (SZ_256M)
+#define CONFIG_SYS_NAND_PAGE_SIZE      SZ_2K
+#define CONFIG_SYS_NAND_BLOCK_SIZE     (SZ_128K)
 #define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
                                         CONFIG_SYS_NAND_PAGE_SIZE)
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS