Move PHYLIB to Kconfig

[platform/kernel/u-boot.git] / include / configs / smartweb.h

diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index fd557a9..a80d290 100644 (file)
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -46,8 +46,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS       /* pass memory defs to kernel */
 #define CONFIG_INITRD_TAG              /* pass initrd param to kernel */
 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY /* U-Boot is loaded by a bootloader */
-#define CONFIG_BOARD_EARLY_INIT_F      /* call board_early_init_f() */
-#define CONFIG_DISPLAY_CPUINFO         /* display CPU Info at startup */
 
 /* We set the max number of command args high to avoid HUSH bugs. */
 #define CONFIG_SYS_MAXARGS    32
@@ -85,7 +83,6 @@
 
 /* NAND flash settings */
 #define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8
@@ -94,7 +91,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN     AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN      AT91_PIN_PC13
 
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define MTDIDS_NAME_STR                "atmel_nand"
 #define MTDIDS_DEFAULT         "nand0=" MTDIDS_NAME_STR
@@ -115,14 +111,12 @@
 #define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE              ATMEL_BASE_DBGU
 #define CONFIG_USART_ID                        ATMEL_ID_SYS
-#define CONFIG_BAUDRATE                        115200
 
 /*
  * Ethernet configuration
  *
  */
 #define CONFIG_MACB
-#define CONFIG_PHYLIB
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_MCS7830
@@ -159,7 +153,6 @@
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
 
 /* USB DFU support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 
@@ -187,7 +180,6 @@
 /*
  * The NAND Flash partitions:
  */
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET              (0x100000)
 #define CONFIG_ENV_OFFSET_REDUND       (0x180000)
 #define CONFIG_ENV_RANGE               (SZ_512K)
@@ -203,18 +195,13 @@
                                                                        \
        "mtdparts="MTDPARTS_DEFAULT"\0"
 
-/* Command line & features configuration */
-
-#define CONFIG_CMD_NAND
-
-#ifdef CONFIG_MACB
-#else
-#endif /* CONFIG_MACB */
-
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_INIT_SP_ADDR                0x301000
 #define CONFIG_SPL_STACK_R
 #define CONFIG_SPL_STACK_R_ADDR                CONFIG_SYS_TEXT_BASE
+/* we have only 4k sram in SPL, so cut SYS_MALLOC_F_LEN */
+#undef CONFIG_SYS_MALLOC_F_LEN
+#define CONFIG_SYS_MALLOC_F_LEN 0x400
 #else
 /*
  * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
@@ -237,7 +224,6 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
 #define CONFIG_SPL_LDSCRIPT    arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
 #define CONFIG_SYS_USE_NANDFLASH       1
 #define CONFIG_SPL_NAND_DRIVERS
@@ -273,9 +259,7 @@
 #define CONFIG_SYS_AT91_PLLB           0x10483f0e
 
 #if defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_THUMB_BUILD
 #define CONFIG_SYS_ICACHE_OFF
 #define CONFIG_SYS_DCACHE_OFF
-#undef CONFIG_SPL_OS_BOOT              /* Not supported by existing map */
 #endif
 #endif /* __CONFIG_H */