#include <linux/sizes.h>
/*
- * Warning: changing CONFIG_SYS_TEXT_BASE requires adapting the initial boot
+ * Warning: changing CONFIG_TEXT_BASE requires adapting the initial boot
* program. Since the linker has to swallow that define, we must use a pure
* hex number here!
*/
*/
/* NAND flash settings */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
-#define CONFIG_SYS_NAND_DBW_8
-#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
-#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
+#define CFG_SYS_NAND_BASE ATMEL_BASE_CS3
+#define CFG_SYS_NAND_MASK_ALE (1 << 21)
+#define CFG_SYS_NAND_MASK_CLE (1 << 22)
+#define CFG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
+#define CFG_SYS_NAND_READY_PIN AT91_PIN_PC13
/* serial console */
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
-/* USB configuration */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-
/* USB DFU support */
#define CONFIG_USB_GADGET_AT91
/* Defines for SPL */
-#define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
-#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
+#define CFG_SYS_NAND_U_BOOT_SIZE SZ_512K
+#define CFG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
+#define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
-#define CONFIG_SYS_NAND_SIZE (SZ_256M)
-#define CONFIG_SYS_NAND_ECCSIZE 256
-#define CONFIG_SYS_NAND_ECCBYTES 3
-#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \
+#define CFG_SYS_NAND_ECCSIZE 256
+#define CFG_SYS_NAND_ECCBYTES 3
+#define CFG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \
48, 49, 50, 51, 52, 53, 54, 55, \
56, 57, 58, 59, 60, 61, 62, 63, }