#include <linux/sizes.h>
/*
- * Warning: changing CONFIG_SYS_TEXT_BASE requires adapting the initial boot
+ * Warning: changing CONFIG_TEXT_BASE requires adapting the initial boot
* program. Since the linker has to swallow that define, we must use a pure
* hex number here!
*/
/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
-#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432MHz crystal */
+#define CFG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
+#define CFG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432MHz crystal */
/* misc settings */
-/* We set the max number of command args high to avoid HUSH bugs. */
-#define CONFIG_SYS_MAXARGS 32
-
-/* setting board specific options */
-#define CONFIG_SYS_AUTOLOAD "yes"
-
-/* The LED PINs */
-#define CONFIG_RED_LED AT91_PIN_PA9
-#define CONFIG_GREEN_LED AT91_PIN_PA6
-
/*
* SDRAM: 1 bank, 64 MB, base address 0x20000000
* Already initialized before u-boot gets started.
*/
-#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
-#define CONFIG_SYS_SDRAM_SIZE (64 * SZ_1M)
+#define CFG_SYS_SDRAM_BASE ATMEL_BASE_CS1
+#define CFG_SYS_SDRAM_SIZE (64 * SZ_1M)
/*
* Perform a SDRAM Memtest from the start of SDRAM
*/
/* NAND flash settings */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
-#define CONFIG_SYS_NAND_DBW_8
-#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
-#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
+#define CFG_SYS_NAND_BASE ATMEL_BASE_CS3
+#define CFG_SYS_NAND_MASK_ALE (1 << 21)
+#define CFG_SYS_NAND_MASK_CLE (1 << 22)
+#define CFG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
+#define CFG_SYS_NAND_READY_PIN AT91_PIN_PC13
/* serial console */
-#define CONFIG_USART_BASE ATMEL_BASE_DBGU
-#define CONFIG_USART_ID ATMEL_ID_SYS
-
-#if !defined(CONFIG_SPL_BUILD)
-/* USB configuration */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-
-/* USB DFU support */
-
-#define CONFIG_USB_GADGET_AT91
+#define CFG_USART_BASE ATMEL_BASE_DBGU
+#define CFG_USART_ID ATMEL_ID_SYS
/* DFU class support */
#define DFU_MANIFEST_POLL_TIMEOUT 25000
-#endif
/* General Boot Parameter */
-#define CONFIG_SYS_CBSIZE 512
-
-/*
- * The NAND Flash partitions:
- */
-#define CONFIG_ENV_RANGE (SZ_512K)
/*
* Predefined environment variables.
* Usefull to define some easy to use boot commands.
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
\
"basicargs=console=ttyS0,115200\0" \
\
- "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0"
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR 0x301000
-#else
/*
* Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
* leaving the correct space for initial global data structure above that
* address while providing maximum stack area below.
*/
-#define CONFIG_SYS_INIT_SP_ADDR \
- (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
-#endif
+#define CFG_SYS_INIT_RAM_SIZE 0x1000
+#define CFG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1
/* Defines for SPL */
-#define CONFIG_SPL_MAX_SIZE (SZ_4K)
-
-#define CONFIG_SPL_BSS_START_ADDR CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SPL_BSS_MAX_SIZE (SZ_16K)
-#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
- CONFIG_SPL_BSS_MAX_SIZE)
-#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
-
-#define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
-#define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SPL_NAND_SOFTECC
-#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_NAND_SIZE (SZ_256M)
-#define CONFIG_SYS_NAND_ECCSIZE 256
-#define CONFIG_SYS_NAND_ECCBYTES 3
-#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \
+
+#define CFG_SYS_NAND_U_BOOT_SIZE SZ_512K
+#define CFG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
+#define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
+
+#define CFG_SYS_NAND_ECCSIZE 256
+#define CFG_SYS_NAND_ECCBYTES 3
+#define CFG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \
48, 49, 50, 51, 52, 53, 54, 55, \
56, 57, 58, 59, 60, 61, 62, 63, }
-#define CONFIG_SYS_MASTER_CLOCK (198656000/2)
+#define CFG_SYS_MASTER_CLOCK (198656000/2)
#define AT91_PLL_LOCK_TIMEOUT 1000000
-#define CONFIG_SYS_AT91_PLLA 0x2060bf09
-#define CONFIG_SYS_MCKR 0x100
-#define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR)
-#define CONFIG_SYS_AT91_PLLB 0x10483f0e
-
-#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS
-#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO
+#define CFG_SYS_AT91_PLLA 0x2060bf09
+#define CFG_SYS_MCKR 0x100
+#define CFG_SYS_MCKR_CSS (0x02 | CFG_SYS_MCKR)
+#define CFG_SYS_AT91_PLLB 0x10483f0e
#endif /* __CONFIG_H */