Convert CONFIG_SYS_NAND_U_BOOT_LOCATIONS et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / smartweb.h

diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index 114b87e..2538287 100644 (file)
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -40,17 +40,11 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK     18432000        /* 18.432MHz crystal */
 
 /* misc settings */
-#define CONFIG_CMDLINE_TAG             /* pass commandline to Kernel */
-#define CONFIG_SETUP_MEMORY_TAGS       /* pass memory defs to kernel */
-#define CONFIG_INITRD_TAG              /* pass initrd param to kernel */
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY /* U-Boot is loaded by a bootloader */
 
 /* We set the max number of command args high to avoid HUSH bugs. */
 #define CONFIG_SYS_MAXARGS    32
 
 /* setting board specific options */
-#define CONFIG_MACH_TYPE               MACH_TYPE_SMARTWEB
-#define CONFIG_ENV_OVERWRITE    1 /* Overwrite ethaddr / serial# */
 #define CONFIG_SYS_AUTOLOAD "yes"
 #define CONFIG_RESET_TO_RETRY
 
@@ -69,12 +63,6 @@
  * Perform a SDRAM Memtest from the start of SDRAM
  * till the beginning of the U-Boot position in RAM.
  */
-#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_TEXT_BASE - 0x100000)
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN \
-       ROUND(3 * CONFIG_ENV_SIZE + (4 * SZ_1M), 0x1000)
 
 /* NAND flash settings */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
@@ -87,11 +75,9 @@
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
-#define CONFIG_AT91_GPIO               /* enable the GPIO features */
 #define CONFIG_AT91_GPIO_PULLUP        1       /* keep pullups on peripheral pins */
 
 /* serial console */
-#define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE              ATMEL_BASE_DBGU
 #define CONFIG_USART_ID                        ATMEL_ID_SYS
 
@@ -106,19 +92,12 @@
 
 /* BOOTP and DHCP options */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_NFSBOOTCOMMAND                                          \
+#define NFSBOOTCOMMAND                                         \
        "setenv autoload yes; setenv autoboot yes; "                    \
        "setenv bootargs ${basicargs} ${mtdparts} "                     \
        "root=/dev/nfs ip=dhcp nfsroot=${serverip}:/srv/nfs/rootfs; "   \
        "dhcp"
 
-/* Enable the watchdog */
-#define CONFIG_AT91SAM9_WATCHDOG
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_HW_WATCHDOG
-#endif
-#define CONFIG_AT91_HW_WDT_TIMEOUT     15
-
 #if !defined(CONFIG_SPL_BUILD)
 /* USB configuration */
 #define CONFIG_USB_ATMEL
@@ -134,7 +113,6 @@
 #define CONFIG_USB_GADGET_AT91
 
 /* DFU class support */
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE   SZ_1M
 #define DFU_MANIFEST_POLL_TIMEOUT      25000
 #endif
 
@@ -143,18 +121,9 @@
 #define CONFIG_SYS_CBSIZE              512
 
 /*
- * RAM Memory address where to put the
- * Linux Kernel befor starting.
- */
-#define CONFIG_SYS_LOAD_ADDR           0x22000000
-
-/*
  * The NAND Flash partitions:
  */
-#define CONFIG_ENV_OFFSET              (0x100000)
-#define CONFIG_ENV_OFFSET_REDUND       (0x180000)
 #define CONFIG_ENV_RANGE               (SZ_512K)
-#define CONFIG_ENV_SIZE                        (SZ_128K)
 
 /*
  * Predefined environment variables.
@@ -181,7 +150,6 @@
 #endif
 
 /* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE           0x0
 #define CONFIG_SPL_MAX_SIZE            (SZ_4K)
 
 #define CONFIG_SPL_BSS_START_ADDR      CONFIG_SYS_SDRAM_BASE
@@ -192,26 +160,15 @@
 
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
 #define CONFIG_SYS_USE_NANDFLASH       1
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_RAW_ONLY
 #define CONFIG_SPL_NAND_SOFTECC
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x20000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    SZ_512K
 #define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #define CONFIG_SYS_NAND_SIZE           (SZ_256M)
-#define CONFIG_SYS_NAND_PAGE_SIZE      SZ_2K
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (SZ_128K)
-#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
-                                        CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCSIZE                256
 #define CONFIG_SYS_NAND_ECCBYTES       3
-#define CONFIG_SYS_NAND_OOBSIZE                64
 #define CONFIG_SYS_NAND_ECCPOS         { 40, 41, 42, 43, 44, 45, 46, 47, \
                                          48, 49, 50, 51, 52, 53, 54, 55, \
                                          56, 57, 58, 59, 60, 61, 62, 63, }
@@ -224,8 +181,7 @@
 #define CONFIG_SYS_MCKR_CSS            (0x02 | CONFIG_SYS_MCKR)
 #define CONFIG_SYS_AT91_PLLB           0x10483f0e
 
-#if defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
-#endif
+#define CONFIG_SPL_PAD_TO              CONFIG_SYS_NAND_U_BOOT_OFFS
+#define CONFIG_SYS_SPL_LEN             CONFIG_SPL_PAD_TO
+
 #endif /* __CONFIG_H */