Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACY

[platform/kernel/u-boot.git] / include / configs / siemens-am33x-common.h

diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 1281955..9cf3c67 100644 (file)
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -18,7 +18,6 @@
 #define CONFIG_DMA_COHERENT
 #define CONFIG_DMA_COHERENT_SIZE       (1 << 20)
 
-#define CONFIG_ENV_SIZE                        (0x2000)
 #define CONFIG_SYS_MALLOC_LEN          (16 * 1024 * 1024)
 #ifdef CONFIG_SIEMENS_MACH_TYPE
 #define CONFIG_MACH_TYPE               CONFIG_SIEMENS_MACH_TYPE
@@ -34,8 +33,6 @@
 #define CONFIG_ROOTPATH                "/opt/eldk"
 #endif
 
-#define CONFIG_ENV_OVERWRITE           1
-
 #define CONFIG_SYS_AUTOLOAD    "yes"
 
 /* Clock Defines */
@@ -55,9 +52,6 @@
  * memtest works on 8 MB in DRAM after skipping 32MB from
  * start addr of ram disk
  */
-#define CONFIG_SYS_MEMTEST_START       (PHYS_DRAM_1 + (64 * 1024 * 1024))
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START \
-                                       + (8 * 1024 * 1024))
 
 #define CONFIG_SYS_LOAD_ADDR           0x81000000 /* Default load address */
 
@@ -72,18 +66,13 @@
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
 
 /* NS16550 Configuration */
-#ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    (-4)
-#endif
 #define CONFIG_SYS_NS16550_CLK         (48000000)
 #define CONFIG_SYS_NS16550_COM1                0x44e09000
 #define CONFIG_SYS_NS16550_COM4                0x481a6000
 
 
 /* I2C Configuration */
-#define CONFIG_I2C
-#define CONFIG_SYS_I2C
 
 /* Defines for SPL */
 #define CONFIG_SPL_MAX_SIZE            (SRAM_SCRATCH_SPACE_ADDR - \
@@ -92,14 +81,8 @@
 #define CONFIG_SPL_BSS_START_ADDR      0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000         /* 512 KB */
 
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
-
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
@@ -158,7 +141,6 @@
 #define CONFIG_USBD_HS
 
 /* USB Device Firmware Update support */
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE   (1 << 20)
 #define DFU_MANIFEST_POLL_TIMEOUT      25000
 
 #endif /* CONFIG_SPL_BUILD */
@@ -175,22 +157,14 @@
  * 0xE0000 - 0x442000 : Linux Kernel
  * 0x442000 - 0x800000 : Userland
  */
-#if defined(CONFIG_SPI_BOOT)
-# define CONFIG_ENV_OFFSET             (892 << 10) /* 892 KiB in */
-# define CONFIG_ENV_SECT_SIZE          (4 << 10) /* 4 KB sectors */
-#endif /* SPI support */
-
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
+
 #define CONFIG_NET_RETRY_COUNT         10
 
 /* NAND support */
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 /* UBI Support */
 
 /* Commen environment */
-#define CONFIG_PREBOOT
 #define COMMON_ENV_DFU_ARGS    "dfu_args=run bootargs_defaults;" \
                                "setenv bootargs ${bootargs};" \
                                "mtdparts default;" \
@@ -461,7 +435,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of NAND
                                                           devices */
 #if !defined(CONFIG_SPI_BOOT)
-#define CONFIG_ENV_OFFSET              0x260000 /* environment starts here */
 #define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
 #endif
 #endif