Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / siemens-am33x-common.h

diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 09e4836..0972767 100644 (file)
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -33,8 +33,6 @@
 #define CONFIG_ROOTPATH                "/opt/eldk"
 #endif
 
-#define CONFIG_ENV_OVERWRITE           1
-
 #define CONFIG_SYS_AUTOLOAD    "yes"
 
 /* Clock Defines */
@@ -54,11 +52,6 @@
  * memtest works on 8 MB in DRAM after skipping 32MB from
  * start addr of ram disk
  */
-#define CONFIG_SYS_MEMTEST_START       (PHYS_DRAM_1 + (64 * 1024 * 1024))
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START \
-                                       + (8 * 1024 * 1024))
-
-#define CONFIG_SYS_LOAD_ADDR           0x81000000 /* Default load address */
 
  /* Physical Memory Map */
 #define PHYS_DRAM_1                    0x80000000      /* DRAM Bank #1 */
@@ -71,18 +64,13 @@
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
 
 /* NS16550 Configuration */
-#ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    (-4)
-#endif
 #define CONFIG_SYS_NS16550_CLK         (48000000)
 #define CONFIG_SYS_NS16550_COM1                0x44e09000
 #define CONFIG_SYS_NS16550_COM4                0x481a6000
 
 
 /* I2C Configuration */
-#define CONFIG_I2C
-#define CONFIG_SYS_I2C
 
 /* Defines for SPL */
 #define CONFIG_SPL_MAX_SIZE            (SRAM_SCRATCH_SPACE_ADDR - \
@@ -91,12 +79,8 @@
 #define CONFIG_SPL_BSS_START_ADDR      0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000         /* 512 KB */
 
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
@@ -138,9 +122,6 @@
  * Since SPL did pll and ddr initialization for us,
  * we don't need to do it twice.
  */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
 
 #ifndef CONFIG_SPL_BUILD
 /*
@@ -155,7 +136,6 @@
 #define CONFIG_USBD_HS
 
 /* USB Device Firmware Update support */
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE   (1 << 20)
 #define DFU_MANIFEST_POLL_TIMEOUT      25000
 
 #endif /* CONFIG_SPL_BUILD */
@@ -173,13 +153,10 @@
  * 0x442000 - 0x800000 : Userland
  */
 
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT         10
 
 /* NAND support */
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 /* UBI Support */
 
 /* Commen environment */