global: Migrate CONFIG_MXC_UART_BASE to CFG

[platform/kernel/u-boot.git] / include / configs / sheevaplug.h

diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index ed5e284..4e0b3c6 100644 (file)
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -1,5 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
+ * (C) Copyright 2022 Tony Dinh <mibodhi@gmail.com>
  * (C) Copyright 2009-2014
  * Gerald Kerma <dreagle@doukki.net>
  * Marvell Semiconductor <www.marvell.com>
@@ -9,78 +10,15 @@
 #ifndef _CONFIG_SHEEVAPLUG_H
 #define _CONFIG_SHEEVAPLUG_H
 
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_FEROCEON_88FR131        1       /* CPU Core subversion */
-
-/*
- * Commands configuration
- */
-
-/*
- * Standard filesystems
- */
-#define CONFIG_BZIP2
-
-/*
- * mv-plug-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
-#include "mv-plug-common.h"
+#include "mv-common.h"
 
 /*
  *  Environment variables configurations
  */
-/*
- * max 4k env size is enough, but in case of nand
- * it has to be rounded to sector size
- */
-/*
- * Environment is right behind U-Boot in flash. Make sure U-Boot
- * doesn't grow into the environment area.
- */
-#define CONFIG_BOARD_SIZE_LIMIT                CONFIG_ENV_OFFSET
-
-/*
- * Default environment variables
- */
-#define CONFIG_BOOTCOMMAND             "${x_bootcmd_kernel}; " \
-       "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
-       "bootm 0x6400000;"
-
-#define CONFIG_EXTRA_ENV_SETTINGS      "x_bootargs=console"    \
-       "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS_DEFAULT        \
+#define CFG_EXTRA_ENV_SETTINGS "x_bootargs=console"    \
+       "=ttyS0,115200 mtdparts=" CONFIG_MTDPARTS_DEFAULT       \
        "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x400000\0" \
        "x_bootcmd_usb=usb start\0" \
        "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
 
-/*
- * Ethernet Driver configuration
- */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_MVGBE_PORTS     {1, 0}  /* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR    0
-#endif /* CONFIG_CMD_NET */
-
-/*
- * SDIO/MMC Card Configuration
- */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_MVEBU_MMC
-#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
-#endif /* CONFIG_CMD_MMC */
-
-/*
- * SATA driver configuration
- */
-#ifdef CONFIG_IDE
-#define __io
-#define CONFIG_IDE_PREINIT
-#define CONFIG_MVSATA_IDE_USE_PORT0
-#define CONFIG_MVSATA_IDE_USE_PORT1
-#define CONFIG_SYS_ATA_IDE0_OFFSET     MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_ATA_IDE1_OFFSET     MV_SATA_PORT1_OFFSET
-#endif /* CONFIG_IDE */
-
 #endif /* _CONFIG_SHEEVAPLUG_H */