Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE

[platform/kernel/u-boot.git] / include / configs / sequoia.h

diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 9605ce2..b8581de 100644 (file)
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -42,6 +42,10 @@
 #define CONFIG_440             1       /* ... PPC440 family            */
 #define CONFIG_4xx             1       /* ... PPC4xx family            */
 
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xFFF80000
+#endif
+
 /*
  * Include common defines/options for all AMCC eval boards
  */
@@ -53,7 +57,7 @@
 
 /*
  * Define this if you want support for video console with radeon 9200 pci card
- * Also set TEXT_BASE to 0xFFF80000 in board/amcc/sequoia/config.mk in this case
+ * Also set CONFIG_SYS_TEXT_BASE to 0xFFF80000 in board/amcc/sequoia/config.mk in this case
  */
 #undef CONFIG_VIDEO
 
@@ -84,9 +88,6 @@
 #define CONFIG_SYS_PCI_MEMBASE2        CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
 #define CONFIG_SYS_PCI_MEMBASE3        CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
 
-/* Don't change either of these */
-#define CONFIG_SYS_PERIPHERAL_BASE     0xef600000      /* internal peripherals */
-
 #define CONFIG_SYS_USB2D0_BASE         0xe0000100
 #define CONFIG_SYS_USB_DEVICE          0xe0000000
 #define CONFIG_SYS_USB_HOST            0xe0000400
@@ -97,17 +98,16 @@
  */
 /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache    */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_OCM_BASE     /* OCM                  */
-#define CONFIG_SYS_INIT_RAM_END        (4 << 10)
+#define CONFIG_SYS_INIT_RAM_SIZE       (4 << 10)
 #define CONFIG_SYS_GBL_DATA_SIZE       256     /* num bytes initial data       */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 /*
  * Serial Port
  */
+#define CONFIG_CONS_INDEX      1       /* Use UART0                    */
 #define CONFIG_SYS_EXT_SERIAL_CLOCK    11059200        /* ext. 11.059MHz clk   */
-/* define this if you want console on UART1 */
-#undef CONFIG_UART1_CONSOLE
 
 /*
  * Environment
@@ -282,8 +282,20 @@
 
 /* USB */
 #ifdef CONFIG_440EPX
+
+#undef CONFIG_USB_EHCI /* OHCI by default */
+
+#ifdef CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_PPC4XX
+#define CONFIG_SYS_PPC4XX_USB_ADDR     0xe0000300
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#ifdef CONFIG_4xx_DCACHE
+#define CONFIG_EHCI_DCACHE
+#endif
+#else /* CONFIG_USB_EHCI */
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_USB_STORAGE
 #define CONFIG_SYS_OHCI_BE_CONTROLLER
 
 #undef CONFIG_SYS_USB_OHCI_BOARD_INIT
@@ -291,7 +303,9 @@
 #define CONFIG_SYS_USB_OHCI_REGS_BASE  CONFIG_SYS_USB_HOST
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME  "ppc440"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
+#endif
 
+#define CONFIG_USB_STORAGE
 /* Comment this out to enable USB 1.1 device */
 #define USB_2_0_DEVICE
 
@@ -343,7 +357,6 @@
                                 CONFIG_SYS_POST_SPR       | \
                                 CONFIG_SYS_POST_UART)
 
-#define CONFIG_SYS_POST_WORD_ADDR      (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 #define CONFIG_LOGBUFFER
 #define CONFIG_SYS_POST_CACHE_ADDR     0x7fff0000      /* free virtual address     */
 
@@ -364,6 +377,7 @@
 /* Board-specific PCI */
 #define CONFIG_SYS_PCI_TARGET_INIT
 #define CONFIG_SYS_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_BOARD_FIXUP_IRQ
 
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8  /* AMCC                         */
 #define CONFIG_SYS_PCI_SUBSYS_ID       0xcafe  /* Whatever                     */