i2c: Move PPC4xx I2C driver into drivers/i2c directory

[platform/kernel/u-boot.git] / include / configs / sc520_cdp.h

diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h
index 82faca8..2f1dae7 100644 (file)
--- a/include/configs/sc520_cdp.h
+++ b/include/configs/sc520_cdp.h
@@ -30,7 +30,6 @@
 
 #define CONFIG_SKIP_RELOCATE_UBOOT
 
-#define GRUSS_TESTING
 /*
  * High Level Configuration Options
  * (easy to change)
@@ -66,7 +65,7 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_MALLOC_SIZE     (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_MALLOC_LEN  (CONFIG_ENV_SIZE + 128*1024)
 
 #define CONFIG_BAUDRATE                9600
 
@@ -85,11 +84,7 @@
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_PCI
-#ifndef GRUSS_TESTING
 #define CONFIG_CMD_SATA
-#else
-#undef CONFIG_CMD_SATA
-#endif
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_EEPROM
@@ -116,8 +111,6 @@
 #define CONFIG_SYS_MEMTEST_START       0x00100000      /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0x01000000      /* 1 ... 16 MB in DRAM  */
 
-#undef  CONFIG_SYS_CLKS_IN_HZ          /* everything, incl board info, in Hz */
-
 #define        CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 
 #define        CONFIG_SYS_HZ                   1024            /* incrementer freq: 1kHz */
@@ -159,14 +152,14 @@
  * JFFS2 partitions
  */
 /* No command line, one static partition, whole device */
-#undef CONFIG_JFFS2_CMDLINE
+#undef CONFIG_CMD_MTDPARTS
 #define CONFIG_JFFS2_DEV               "nor0"
 #define CONFIG_JFFS2_PART_SIZE         0xFFFFFFFF
 #define CONFIG_JFFS2_PART_OFFSET       0x00000000
 
 /* mtdparts command line support */
 /*
-#define CONFIG_JFFS2_CMDLINE
+#define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT         "nor0=SC520CDP Flash Bank #0"
 #define MTDPARTS_DEFAULT       "mtdparts=SC520CDP Flash Bank #0:-(jffs2)"
 */
@@ -183,17 +176,10 @@
 /************************************************************
 *SATA/Native Stuff
 ************************************************************/
-#ifndef GRUSS_TESTING
 #define CONFIG_SYS_SATA_MAXBUS         2       /*Max Sata buses supported */
 #define CONFIG_SYS_SATA_DEVS_PER_BUS   2      /*Max no. of devices per bus/port */
 #define CONFIG_SYS_SATA_MAX_DEVICE     (CONFIG_SYS_SATA_MAXBUS* CONFIG_SYS_SATA_DEVS_PER_BUS)
 #define CONFIG_ATA_PIIX                1       /*Supports ata_piix driver */
-#else
-#undef CONFIG_SYS_SATA_MAXBUS
-#undef CONFIG_SYS_SATA_DEVS_PER_BUS
-#undef CONFIG_SYS_SATA_MAX_DEVICE
-#undef CONFIG_ATA_PIIX
-#endif
 
 
 /************************************************************
@@ -206,11 +192,9 @@
 /************************************************************
  * Video/Keyboard support
  ************************************************************/
-#ifndef GRUSS_TESTING
 #define CONFIG_VIDEO                   /* To enable video controller support */
-#else
-#undef CONFIG_VIDEO
-#endif
+#define PCI_VIDEO_VENDOR_ID 0          /*Use the appropriate vendor ID*/
+#define PCI_VIDEO_DEVICE_ID 0          /*Use the appropriate Device ID*/
 #define CONFIG_I8042_KBD
 #define CONFIG_SYS_ISA_IO 0
 
@@ -223,7 +207,6 @@
 /*
  * PCI stuff
  */
-#ifndef GRUSS_TESTING
 #define CONFIG_PCI                                /* include pci support */
 #define CONFIG_PCI_PNP                            /* pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW
@@ -232,11 +215,6 @@
 #define        CONFIG_SYS_SECOND_PCI_IRQ  9
 #define CONFIG_SYS_THIRD_PCI_IRQ   11
 #define        CONFIG_SYS_FORTH_PCI_IRQ   15
-#else
-#undef CONFIG_PCI
-#undef CONFIG_PCI_PNP
-#undef CONFIG_PCI_SCAN_SHOW
-#endif
 
 
 #endif /* __CONFIG_H */