Convert CONFIG_SHOW_BOOT_PROGRESS to Kconfig

[platform/kernel/u-boot.git] / include / configs / sbc8548.h

diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 041e69e..6aa40ca 100644 (file)
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2007,2009 Wind River Systems <www.windriver.com>
  * Copyright 2007 Embedded Specialties, Inc.
  * Copyright 2004, 2007 Freescale Semiconductor.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -43,25 +42,13 @@
  */
 #undef CONFIG_SYS_ALT_BOOT
 
-#ifndef CONFIG_SYS_TEXT_BASE
-#ifdef CONFIG_SYS_ALT_BOOT
-#define CONFIG_SYS_TEXT_BASE   0xfff00000
-#else
-#define CONFIG_SYS_TEXT_BASE   0xfffa0000
-#endif
-#endif
-
 #undef CONFIG_RIO
 
 #ifdef CONFIG_PCI
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT    1      /* enable 64-bit PCI resources */
 #endif
-#ifdef CONFIG_PCIE1
-#define CONFIG_FSL_PCIE_RESET   1      /* need PCIe reset errata */
-#endif
 
-#define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_INTERRUPTS              /* enable pci, srio, ddr interrupts */
@@ -93,7 +80,6 @@
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
-#undef CONFIG_FSL_DDR_INTERACTIVE
 #undef CONFIG_DDR_ECC                  /* only for ECC DDR module */
 /*
  * A hardware errata caused the LBC SDRAM SPD and the DDR2 SPD
@@ -255,8 +241,6 @@
 
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 
 /* CS5 = Local bus peripherals controlled by the EPLD */
@@ -394,7 +378,6 @@
 #define CONFIG_SYS_MALLOC_LEN          (1024 * 1024) /* Reserved for malloc */
 
 /* Serial Port */
-#define CONFIG_CONS_INDEX      1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         (400000000 / CONFIG_SYS_CLK_DIV)
@@ -460,7 +443,6 @@
 
 #if defined(CONFIG_TSEC_ENET)
 
-#define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "eTSEC0"
 #define CONFIG_TSEC2   1
@@ -501,18 +483,12 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_CMDLINE_EDITING                 /* undef to save memory */
-#define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 
 /*
@@ -536,7 +512,7 @@
 
 #define CONFIG_IPADDR   192.168.0.55
 
-#define CONFIG_HOSTNAME         sbc8548
+#define CONFIG_HOSTNAME         "sbc8548"
 #define CONFIG_ROOTPATH         "/opt/eldk/ppc_85xx"
 #define CONFIG_BOOTFILE         "/uImage"
 #define CONFIG_UBOOTPATH /u-boot.bin   /* TFTP server */