Convert CONFIG_SPL_BSS_START_ADDR to Kconfig

[platform/kernel/u-boot.git] / include / configs / sama5d3xek.h

diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 29b7e8b..fe3adec 100644 (file)
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuation settings for the SAMA5D3xEK board.
  *
@@ -6,8 +7,6 @@
  * based on at91sam9m10g45ek.h by:
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -15,78 +14,43 @@
 
 #include "at91-sama5_common.h"
 
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
 /*
  * This needs to be defined for the OHCI code to work but it is defined as
  * ATMEL_ID_UHPHS in the CPU specific header files.
  */
-#define ATMEL_ID_UHP                   ATMEL_ID_UHPHS
+#define ATMEL_ID_UHP                   32
 
 /*
  * Specify the clock enable bit in the PMC_SCER register.
  */
-#define ATMEL_PMC_UHP                  AT91SAM926x_PMC_UHP
-
-/* LCD */
-#define LCD_BPP                                LCD_COLOR16
-#define LCD_OUTPUT_BPP                  24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
+#define ATMEL_PMC_UHP                  (1 <<  6)
 
 /* board specific (not enough SRAM) */
 #define CONFIG_SAMA5D3_LCD_BASE                0x23E00000
 
 /* NOR flash */
 #ifdef CONFIG_MTD_NOR_FLASH
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_PROTECTION
 #define CONFIG_SYS_FLASH_BASE          0x10000000
 #define CONFIG_SYS_MAX_FLASH_SECT      131
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
 #endif
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS           1
-#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_BASE           0x20000000
 #define CONFIG_SYS_SDRAM_SIZE          0x20000000
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR                0x318000
-#else
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
-#endif
-
 /* SerialFlash */
 
-#ifdef CONFIG_CMD_SF
-#define CONFIG_SF_DEFAULT_SPEED                30000000
-#endif
-
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_BASE           ATMEL_BASE_CS3
+#define CONFIG_SYS_NAND_BASE           0x60000000
 /* our ALE is AD21 */
 #define CONFIG_SYS_NAND_MASK_ALE       (1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE       (1 << 22)
-#define CONFIG_SYS_NAND_ONFI_DETECTION
 #endif
-/* PMECC & PMERRLOC */
-#define CONFIG_ATMEL_NAND_HWECC
-#define CONFIG_ATMEL_NAND_HW_PMECC
-#define CONFIG_PMECC_CAP               4
-#define CONFIG_PMECC_SECTOR_SIZE       512
 
 /* USB */
-
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL
 #define CONFIG_USB_OHCI_NEW
@@ -96,47 +60,10 @@
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     3
 #endif
 
-#define CONFIG_SYS_LOAD_ADDR                   0x22000000 /* load address */
-
-#ifdef CONFIG_SYS_USE_SERIALFLASH
-/* override the bootcmd, bootargs and other configuration for spi flash env*/
-#elif CONFIG_SYS_USE_NANDFLASH
-/* override the bootcmd, bootargs and other configuration nandflash env */
-#elif CONFIG_SYS_USE_MMC
-/* override the bootcmd, bootargs and other configuration for sd/mmc env */
-#endif
-
 /* SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE           0x300000
-#define CONFIG_SPL_MAX_SIZE            0x18000
-#define CONFIG_SPL_BSS_START_ADDR      0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x80000
 #define CONFIG_SYS_SPL_MALLOC_START    0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
 
 #define CONFIG_SYS_MONITOR_LEN         (512 << 10)
 
-#ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
-
-#elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE      0x800
-#define CONFIG_SYS_NAND_PAGE_COUNT     64
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     0x20000
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0x0
-#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
-
-#elif CONFIG_SYS_USE_SERIALFLASH
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x10000
-
-#endif
-
 #endif