Convert CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / sama5d3_xplained.h

diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index 074c756..a100574 100644 (file)
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -1,121 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration settings for the SAMA5D3 Xplained board.
  *
  * Copyright (C) 2014 Atmel Corporation
  *                   Bo Shen <voice.shen@atmel.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/sizes.h>
 #include "at91-sama5_common.h"
 
 /*
  * This needs to be defined for the OHCI code to work but it is defined as
  * ATMEL_ID_UHPHS in the CPU specific header files.
  */
-#define ATMEL_ID_UHP                   ATMEL_ID_UHPHS
+#define ATMEL_ID_UHP                   32
 
 /*
  * Specify the clock enable bit in the PMC_SCER register.
  */
-#define ATMEL_PMC_UHP                  AT91SAM926x_PMC_UHP
+#define ATMEL_PMC_UHP                  (1 <<  6)
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS           1
-#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_BASE           0x20000000
 #define CONFIG_SYS_SDRAM_SIZE          0x10000000
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR                0x318000
-#else
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
-#endif
-
 /* NAND flash */
-#define CONFIG_CMD_NAND
-
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_BASE           ATMEL_BASE_CS3
+#define CONFIG_SYS_NAND_BASE           0x60000000
 /* our ALE is AD21 */
 #define CONFIG_SYS_NAND_MASK_ALE       (1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE       (1 << 22)
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-/* PMECC & PMERRLOC */
-#define CONFIG_ATMEL_NAND_HWECC
-#define CONFIG_ATMEL_NAND_HW_PMECC
-#define CONFIG_PMECC_CAP               4
-#define CONFIG_PMECC_SECTOR_SIZE       512
-#define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_CMD_MTDPARTS
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define CONFIG_CMD_UBIFS
 #endif
 
 /* USB */
-
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE          ATMEL_BASE_OHCI
+#define CONFIG_SYS_USB_OHCI_REGS_BASE          0x00600000
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME          "SAMA5D3 Xplained"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
 #endif
 
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_FAT_WRITE
-#endif
-
-#define CONFIG_SYS_LOAD_ADDR                   0x22000000 /* load address */
-
-#if CONFIG_SYS_USE_NANDFLASH
-/* override the bootcmd, bootargs and other configuration for nandflash env */
-#elif CONFIG_SYS_USE_MMC
-/* override the bootcmd, bootargs and other configuration for sd/mmc env */
-#else
-#define CONFIG_ENV_IS_NOWHERE
-#endif
-
 /* SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE           0x300000
-#define CONFIG_SPL_MAX_SIZE            0x18000
-#define CONFIG_SPL_BSS_START_ADDR      0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x80000
-#define CONFIG_SYS_SPL_MALLOC_START    0x20080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
 
-#define CONFIG_SYS_MONITOR_LEN         (512 << 10)
+/* size of u-boot.bin to load */
+#define CONFIG_SYS_MONITOR_LEN         (2 * SZ_512K)
 
-#ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_SPL_LDSCRIPT            arch/arm/mach-at91/armv7/u-boot-spl.lds
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
-
-#elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE      0x800
-#define CONFIG_SYS_NAND_PAGE_COUNT     64
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     0x20000
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0x0
-#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
-
-#endif
+/* Falcon boot support on raw MMC */
+/* U-Boot proper stored by default at 0x200 (256 KiB) */
 
 #endif