disk: convert CONFIG_DOS_PARTITION to Kconfig

[platform/kernel/u-boot.git] / include / configs / sama5d2_xplained.h

diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
index ae5ba3d..0e73fc2 100644 (file)
--- a/include/configs/sama5d2_xplained.h
+++ b/include/configs/sama5d2_xplained.h
@@ -15,29 +15,24 @@
 
 #include "at91-sama5_common.h"
 
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE              ATMEL_BASE_UART1
-#define CONFIG_USART_ID                        ATMEL_ID_UART1
+#define CONFIG_MISC_INIT_R
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
 #define CONFIG_SYS_SDRAM_SIZE          0x20000000
 
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_INIT_SP_ADDR                0x210000
+#else
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+#endif
 
 #define CONFIG_SYS_LOAD_ADDR           0x22000000 /* load address */
 
-#undef CONFIG_AT91_GPIO
-#define CONFIG_ATMEL_PIO4
-
 /* SerialFlash */
 #ifdef CONFIG_CMD_SF
-#define CONFIG_ATMEL_SPI
-#define CONFIG_ATMEL_SPI0
-#define CONFIG_SPI_FLASH_ATMEL
 #define CONFIG_SF_DEFAULT_BUS          0
 #define CONFIG_SF_DEFAULT_CS           0
 #define CONFIG_SF_DEFAULT_SPEED                30000000
@@ -47,40 +42,18 @@
 #undef CONFIG_CMD_NAND
 
 /* MMC */
-#define CONFIG_CMD_MMC
-
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_SDHCI
-#define CONFIG_ATMEL_SDHCI
-#define CONFIG_ATMEL_SDHCI0
-#define CONFIG_ATMEL_SDHCI1
-#define CONFIG_SUPPORT_EMMC_BOOT
-#endif
-
-/* USB */
-#define CONFIG_CMD_USB
-
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
-#define CONFIG_USB_STORAGE
 #endif
 
 /* USB device */
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_ATMEL_USBA
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETH_RNDIS
 #define CONFIG_USBNET_MANUFACTURER      "Atmel SAMA5D2 XPlained"
 
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
+/* I2C */
+#define AT24MAC_ADDR           0x5c
+#define AT24MAC_REG            0x9a
 
 /* Ethernet Hardware */
 #define CONFIG_MACB
@@ -89,7 +62,6 @@
 #define CONFIG_MACB_SEARCH_PHY
 
 /* LCD */
-/* #define CONFIG_LCD */
 
 #ifdef CONFIG_LCD
 #define LCD_BPP                                LCD_COLOR16
@@ -100,7 +72,6 @@
 #define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_HLCD
 #define CONFIG_ATMEL_LCD_RGB565
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #endif
 
 #ifdef CONFIG_SYS_USE_MMC
@@ -119,4 +90,27 @@
 
 #endif
 
+/* SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE           0x200000
+#define CONFIG_SPL_MAX_SIZE            0x10000
+#define CONFIG_SPL_BSS_START_ADDR      0x20000000
+#define CONFIG_SPL_BSS_MAX_SIZE                0x80000
+#define CONFIG_SYS_SPL_MALLOC_START    0x20080000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_MONITOR_LEN         (512 << 10)
+
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_SPL_LDSCRIPT            arch/arm/mach-at91/armv7/u-boot-spl.lds
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
+
+#elif CONFIG_SYS_USE_SERIALFLASH
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x8000
+
+#endif
+
 #endif